DDM Tuning Apexcone Raptor HID Kit - $30 plus shipping
- Thread starter Matt V
- Start date
i bought the low beam h4 kit cause i had to buy two new headlights due to an accident and p5 headlights are crazy expensive. the h4 kit seems to plug right into the p5 wire harness but do i need to rewire the p5 lowbeam in order to make it work with the hids? i will try to post pics tonight
figured out the problem i just had to repin the p5's lowbeam bulb connector to match the h4s pins and it worked super easy! here are some pics, i will post pics after i align the headlights.
a test fit with my bumper and grill back on
close up of driver side light
Close up of passenger light, i need to have the fender properly fixed but at least the light fits and works now
pic of the lights installed before putting the bumper on, i'm going to leave it off i need to find a way to hook up the lights on the far outside part of the headlights, i will wire it into the turn signal or parking lights not sure which.
I'm going to put the ballast on the passenger side on the side wall here
and the driver side one i think will fit nicely on the side of the fuse box
a test fit with my bumper and grill back on
close up of driver side light
Close up of passenger light, i need to have the fender properly fixed but at least the light fits and works now
pic of the lights installed before putting the bumper on, i'm going to leave it off i need to find a way to hook up the lights on the far outside part of the headlights, i will wire it into the turn signal or parking lights not sure which.
I'm going to put the ballast on the passenger side on the side wall here
and the driver side one i think will fit nicely on the side of the fuse box
jonridinhi
Member
- :
- 2001 MP3/2010 MX5/1996 MILLINIA (donor)
I got to post pics of mine....
Just got done a 55w 8K hi/low on a cobalt. Another clean install and so dam bright.
Just got done a 55w 8K hi/low on a cobalt. Another clean install and so dam bright.
MP3Night
MS3,Mazda3,MSP
Yes but it will save you the cost of having to buy a replacement HID kit down the road, here is how I wired mine:
I have an aftermarket battery tie-down so yours might be slightly different
The relay is on the left, it comes with a bracket to bolt down wherever you want it
Close-up of the positive wire on the positive terminal
Close up of the ground for drivers side ballast and misc. connectors, make sure the location where you install the ground is stripped down to absolutely bare metal
Drivers side zoomed out view
Wiring tucked behind vanity cover
Harness zip tied to another connector for support
Another zip tied location for support
Close up of passenger side area
Passenger side ground point
Passenger side zoomed out
This isn't the cleanest install ever but everything is easily accessible in case anything happens.
Pictures don't work...Could you please fix it :/
twentytwocpb
Member
- :
- Mazda Protege MP3
theyre 25 bucks now!
twentytwocpb
Member
- :
- Mazda Protege MP3
lol kinda ironic someone just bumped this thread up today.
I finally decided to get a pair, ordered it a few hours ago.
5,000k.
Are they pretty straight forward to install? Just pop out the old bulbs and throw in the HID bulbs and plug in a few things?
i hope they are lol i ordered my set today too! but i got the 6,000K ones...i shouldve gone for the 4500 or 5000
justanothermp5
Banned
- :
- Rust Bucket
yes, they just plug in, its pretty easy to figure out
annd i think im goin to buy some sedan lights, they look great
annd i think im goin to buy some sedan lights, they look great
