What have you done to your MS3 today?
- Thread starter ZoomVT
- Start date
Radar_This
Member
yes once the speeds gone the center caps will go on sale. i'll make a small batch to keep it unique for everyone that gets a set. BUT it will be next year sometime. i'll post something somewhere. one of the forums.
I took her into the bodyshop to have the pinch welds above the front tires hammered up and flat for more clearance. Heres a few pics....
Your not flush if you arent rubbing the paint off the fenders...lol.
how much room ive got left on the coils
the before pic of the pinch weld up there in the middle of the fender opening
the after pic
about an inch+ of new clearance from the plastic up to my finger tip
Your not flush if you arent rubbing the paint off the fenders...lol.
how much room ive got left on the coils
the before pic of the pinch weld up there in the middle of the fender opening
the after pic
about an inch+ of new clearance from the plastic up to my finger tip
- :
- 2002 Honda S2000
way to go the extra mile! can't wait to see the new setup...
08SPEED3Veteran
Member
- :
- 08 Mazdaspeed 3 GT
finally had time to take pics...megan racing coils, 2 inch drop up front, 1 inch in the rear. im going to go the full two inches in the back as soon as i get a hold of some spring compressors...
[/IMG]
[/IMG]
[/IMG]
[/IMG]
08SPEED3Veteran
Member
- :
- 08 Mazdaspeed 3 GT
those are winter wheels with the 225/45/18 tires. i got those wheels for $400 and will be picking up another set of wheels over the winter to slap on in spring.
(silly)
Jealous?
(jerkit)
I love 'em. The ride is a heck of a lot smoother, although at higher speeds it's a little freaky. They kind of...wobble for lack of a better word.
My TPMS also hasn't come on....weird.
Cherryvodka
Member
oaklandopen
Member
^^^^so much powah
Cherryvodka
Member
oaklandopen
Member
Did you JUST change your info too? I swear when I checked this thread an hour ago it said "400+whp" and "19psi"
Cherryvodka
Member
yeah i had to update it, here was the last dyno on when i had a boost leak, boost would fluctuate between 26-29lbs. I run 35+psi now.
justanothermp5
Banned
- :
- Rust Bucket
you got forged internals?
Installed COBB FMIC. Took longer than expected because of triple checking every bolt and trying to prevent pipes from scratching. Also flashed to a different map. Everything went well. Now comes the hard part and that is no aggressive driving while brake in. Then a data log and hope things are fine. So far AFR is fine and LTFT will sometimes drop to 0 at idle lol woot. It's still early so more driving is needed.
damn Cherryvodka you created a monster.
damn Cherryvodka you created a monster.
Last edited:
