I get what your saying... But to be honest on the ms6 I ran a occ on top for a few months and there was absolutely nothing. So the bottom occ is the way to go. Immature have to see if you can still add one. In comparison with the price of other kits that's not too bad... And the location is a little low I guess... I will provide them with that feedback, maybe the bracket can be raised a little.
Who wants a free FMIC kit for their speed6 in the Los Angeles area?
- Thread starter BADFISH6
- Start date
The front washer reservoir will not need to be moved, the whole idea they had on the kit was to make it easier to install, without needing to relocate anything.
As far as the FMIC with front bumper, there are no shots because I was told that they would need to unfortunately trim some of the under guard of the bumper and they didn't want to do that without me knowing, so I have the FMIC in my garage, not the piping or anything, so that I can trim the guards. However I have been slammed with school work and work so I haven't had time, should have time in the next week or so, maybe if the FMIC is able to be lifted up a bit it would prevent the guard from having to be trimmed.
As far as the FMIC with front bumper, there are no shots because I was told that they would need to unfortunately trim some of the under guard of the bumper and they didn't want to do that without me knowing, so I have the FMIC in my garage, not the piping or anything, so that I can trim the guards. However I have been slammed with school work and work so I haven't had time, should have time in the next week or so, maybe if the FMIC is able to be lifted up a bit it would prevent the guard from having to be trimmed.
No updates yet.... I haven't heard from them, they did say that it was going to take a few weeks to manufacture the piping.
And Batou is partly right, I do have to trim the underguard, however that is not holding up the fitting. The piping was sent for manufacturing when they test fit everything.
Still waiting to see how many people are interesting in purchasing a kit so I can tell the guy to set up a group buy.
And Batou is partly right, I do have to trim the underguard, however that is not holding up the fitting. The piping was sent for manufacturing when they test fit everything.
Still waiting to see how many people are interesting in purchasing a kit so I can tell the guy to set up a group buy.
Talked to him a few days ago, forgot to post. idk why he aint updating...
anyway he mentioned he does have the full kit and the final fitted pipping.
As for fitment all the piping seems good, but it looks like you still have to cut some of the bar off above where the IC mounts (crash bar?).
so he is hesitant to continue with full install. Last i heard he was still deciding... performance wise, still no word if he actually checked performance with a mock hookup.
anyway he mentioned he does have the full kit and the final fitted pipping.
As for fitment all the piping seems good, but it looks like you still have to cut some of the bar off above where the IC mounts (crash bar?).
so he is hesitant to continue with full install. Last i heard he was still deciding... performance wise, still no word if he actually checked performance with a mock hookup.
Thats not bad at all. With all the parts for my custom kit through cx racing, local shops, ebay. My finished product cost me just under $500, and 2 days of work.
how did you get it for $100 less than it's list price?
I called CXRacing and asked nicely. LOL.
lol nice, funny how being nice is so underrated.
glad they cut you a deal, keep us updated how the (newly) pre-fab kit installs! pics pics pcis!
Will do
