What have you done to your Mazda6 today?

[zinger002]

i have what i believe to be 15 on my front windows. here its 0 tint on the front windows at all. been a year of heavy traffic and lots of cops, not once pulled over for anything, so i have not been warned yet.

I know its wrong, but if its worth someones time or really that dangerous someone will tell me.

Would it be better to be hit by a sliced meat kinda slap on the face? or billions of little glass shards?

 

[zinger002]

i have what i believe to be 15 on my front windows. here its 0 tint on the front windows at all. been a year of heavy traffic and lots of cops, not once pulled over for anything, so i have not been warned yet.

I know its wrong, but if its worth someones time or really that dangerous someone will tell me.

Would it be better to be hit by a sliced meat kinda slap on the face? or billions of little glass shards?

 

[vrspeedemon]

Lol @ the meat slap to the face...took me a bit to figure out what you were talking about.
Tint does hold a broken window together nicely though.

 

[Qwik6]

I think I may go ahead and clean up the ms6 this week. Needs a good clay and wax. Still waiting on one guys response to whether he can get the loan or not. Anothe guy in florida made and offer and I turned him down. The car was going overseas.

 

[Worbit]

Installed the dual 2.5'' magnaflow exhaust and FINALLY got rid of my mexi-wheels for a set of stock speed3 wheels! Pix coming tomorrow......

 

[batou079]

Installed the dual 2.5'' magnaflow exhaust and FINALLY got rid of my mexi-wheels for a set of stock speed3 wheels! Pix coming tomorrow......

GRATS! i LUB my magnaflow CBE, enjoying it yourself i hope!
cant wait for pics of new wheels meng, grats.

 

[Guest20182]

Went for a cruise with the 6crew guys, vrspeedemon pointed out my passenger outer CAR_LED tail came apart within the housing...contacting F4D tomorrow for a replacement.

 

[zinger002]

...mexi-wheels...

what? i don't understand...

 

[event]

Went for a cruise with the 6crew guys, vrspeedemon pointed out my passenger outer CAR_LED tail came apart within the housing...contacting F4D tomorrow for a replacement.

I noticed one of my turn signal LEDs went out... idk if I want to go through the trouble of getting a replacement though...

 

[Worbit]

I noticed one of my turn signal LEDs went out... idk if I want to go through the trouble of getting a replacement though...

dude, for the price that you guys paid for those thing, I'd DEMAND a replacement. Seriously, I'm glad I went with the eBay LED taillights.....no problems so far!!

what? i don't understand...

Mexi-wheels = Mexican wheels.....

Teaser of the MS3 wheels! Im going to give her a wash real quick and then take her out for pictures.....

 

[vrspeedemon]

I've got some spare led boards for the car led tails that I'd sell Cheap.
I have 2 reverse light boards
1 turn signal board
1 inner red board.
Pm me if interested.

 

[Guest20182]

dude, for the price that you guys paid for those thing, I'd DEMAND a replacement. Seriously, I'm glad I went with the eBay LED taillights.....no problems so far!!

Exactly.

 

[vrspeedemon]

Went for a cruise with the 6crew guys, vrspeedemon pointed out my passenger outer CAR_LED tail came apart within the housing...contacting F4D tomorrow for a replacement.

Brian, I understand your frustration given the cost of these tails, but I think we could fix yours up relatively easy. The nut holding the led boarding place worked it's way loose, I suspect from vibration.
If you'd rather send in for a replacement you could do that too but I think we could fix it up with by being craetive with some needlenose pliers and not even need to take it apart, as long as that bolt doesn't fall out we shouldn't need to take it apart or anything.

It's your call tho.

On another note, did anybody else see the new eBay led tails?
The ones that look like the new gen 6 tails?
Price is way up there, but I'm sure it'll drop in time.
I'm kinda digging them.

 

[vrspeedemon]

Worbit...diggin the ms3 wheels.
But I'm sure anything would be an improvement from what you had lol.

 

[Guest20182]

Brian, I understand your frustration given the cost of these tails, but I think we could fix yours up relatively easy. The nut holding the led boarding place worked it's way loose, I suspect from vibration.
If you'd rather send in for a replacement you could do that too but I think we could fix it up with by being craetive with some needlenose pliers and not even need to take it apart, as long as that bolt doesn't fall out we shouldn't need to take it apart or anything.

Thanks for the offer Tim, but I'm not even gonna touch it. Just gonna get a replacement I'm entitled to. I noticed that it isn't dimmer at night, but the viewing angle is different because that circuit board popped out.

EDIT: I take that back, if you have some free time sometime, let's see what we can do!

 

[JDM-P5]

LOL...def getting the ebay ones after all the horror stories I've heard.

 

[Worbit]

Worbit...diggin the ms3 wheels.
But I'm sure anything would be an improvement from what you had lol.

Haha.....I should have gone with steelies and hubcaps! XD

 

[Tungsten6]

BIG IMPROVEMENT!!!!!!!

looks much better than your gangsta wheels.

i drove mine again.....

MILLAGE CHECK!
MS6- 37500
Mz6- 52,100

 

[Guest20182]

Changed my oil, checked the torque on my RMM, didn't move a bit! Going for a drive later tonight!

 

[Speed_J23]

Installed my cp-e rmm and went to RPM last night. The difference with mount is ridiculous I wish I had done this sooner.