cover a hole..

[spoolin_05]

they are rubber...called beauty caps or plugs.

 

[tjader]

go to lowes into the nuts and bolts section. they have a few drawers dedicated to automotive fasteners. these are the ones i used http://www.lowes.com/lowes/lkn?action=productDetail&productId=138361-37672-881217&lpage=none. if you plan on test fitting them buy extra because they will get destroyed pulling them out. heres some pics on my cwp http://s9.photobucket.com/albums/a81/tjader312/mazdasp33d/?albumview=slideshow

 

[Shiroi_ms3]

go to lowes into the nuts and bolts section. they have a few drawers dedicated to automotive fasteners. these are the ones i used http://www.lowes.com/lowes/lkn?action=productDetail&productId=138361-37672-881217&lpage=none. if you plan on test fitting them buy extra because they will get destroyed pulling them out. heres some pics on my cwp http://s9.photobucket.com/albums/a81/tjader312/mazdasp33d/?albumview=slideshow

sorry to resurrect this thread, but some fuckers just stole my ream emblem, so thanks for this info, I am on my way to a local hardware store in search of these plugs.

I hate people.

 

[meicalnissyen]

so i have those two holes on my trunk from the badge what could i use to cover them up.. I dont want to use bondo or whatever to cover it up. Im thinking of using something like screw or whatever.. Any ideas?

ftw

 

[rsvinylgraphics]

iight thank you.. I got to try and find white electrical tape! lol. I dont know lol

I can sell you some white self-adhesive vinyl pre-cut into small circles.

 

[mike son]

I can sell you some white self-adhesive vinyl pre-cut into small circles.

Yea I thought about this once for doing what the OP is asking. Do you have these in anything close to Sunlight Silver?

 

[rsvinylgraphics]

Yea I thought about this once for doing what the OP is asking. Do you have these in anything close to Sunlight Silver?

yes I do

 

[tuOdekcalB]

The plugs from home depot when put in pops out a little right? like a nipples? Could you like get 1/4 round wood stick and paint it to color match and then put it in so it doesn't stick out at all??

 

[MM BOOST]

go to lowes into the nuts and bolts section. they have a few drawers dedicated to automotive fasteners. these are the ones i used http://www.lowes.com/lowes/lkn?action=productDetail&productId=138361-37672-881217&lpage=none. if you plan on test fitting them buy extra because they will get destroyed pulling them out. heres some pics on my cwp http://s9.photobucket.com/albums/a81/tjader312/mazdasp33d/?albumview=slideshow

Can you get plugs at home depot for this?

 

[tuOdekcalB]

I went to home depot and found plastic plugs that where .250 which is 1/4 right? but I think they are to big? did I get the wrong kind????

 

[tjader]

im pretty sure home depot has them as well. i doubt the wood stick idea would work since the hole is just a hole and there wouldn't be anything to hold the stick in place. all they are are plastic plugs or body fasteners if i remember right? i think they were listed as nissan if i'm not mistaken lol