What have you done to your MSP today?

[xDJ DUBx]

They kind of hit the nail on the head with the reliability and little room for bigger turbo/psi on stock block though (lol2)

 

[FlyinHawaiian]

Replaced my coil packs and wires. Cost me $89 in parts only. While I was at it I cleaned up the engine bay as much as I could, get any salt or road grime from the winter out of there and keep it purrdy. Speaking of purr, the car idles beautifully now. The real test is going to be if it still missfires on the way to work tomorrow. I have a feeling it won't and I'm home free.

Thanks for the advice on it 323!

 

[FLAMSP]

Yeah... it really created quite the buzz back then. Now all our cars do is buzz

LOL

hahaha!(lol)

 

[BadBandar]

They kind of hit the nail on the head with the reliability and little room for bigger turbo/psi on stock block though (lol2)

Yea i was surprised they knew so much. I dont know much about subies just that they got a turbo/boxster engine and awd.

 

[Zack]

also in the aggressive fitment thread

not too fond of the bright silver, so I will be having them powder coated as planned. The stance is beautiful though. They do rub as expected so gotta give my rear fenders some more attention to fully clear...or just raise it up a 1/4(**** that!)

 

[theEZV]

wowwee i just jizzed in my pants. props to you man

 

[Laser Blue]

also in the aggressive fitment thread

not too fond of the bright silver, so I will be having them powder coated as planned. The stance is beautiful though. They do rub as expected so gotta give my rear fenders some more attention to fully clear...or just raise it up a 1/4(**** that!)

My guess is that you'll end up needing to do both, if you plan to do much spirited driving... :-(
Looks great though, my Laser brother!

 

[BadBandar]

If you got the time read up this thread. Not a mazda but gotta admire the attention to detail and hardwork. Is it just me or the lines of this car resembles our proteges. (thumb)

http://www.lancerregister.com/showthread.php?t=268523

 

[GiJoe]

That is pure sex... great find man.

And the lines from that overhead shot do really look thike a 3rd gen. Rear window, doors, and windshield, even the trunk length.

 

[evilmonkeyMSP]

hmmm so after shopping around it looks like ebay is going to be the cheapest place to buy my suspension lol

 

[GiJoe]

Hell even the hood, tail lights match. it's looses it at the headlights though.

 

[GiJoe]

hmmm so after shopping around it looks like ebay is going to be the cheapest place to buy my suspension lol

Maybe it's just me, but I really don't trust Ebay with things like that. Even though I baught most of the guns in my collection off of there, Car parts are a risky thing.

 

[Wagonbacker9]

considering installing my new Forge WGA and catless MAM midpipe tonite...

 

[evilmonkeyMSP]

lol honestly, most everything I've bought car wise I get from ebay.

as long as you're smart about who youre buying from and the fine print in the listing then its no different than buying it off any other online site.

Maybe it's just me, but I really don't trust Ebay with things like that. Even though I baught most of the guns in my collection off of there, Car parts are a risky thing.

 

[GiJoe]

lol honestly, most everything I've bought car wise I get from ebay.

as long as you're smart about who youre buying from and the fine print in the listing then its no different than buying it off any other online site.

Yeah, I guess bad stories are stuck in the back of my head.

 

[Wagonbacker9]

So, any reason I can't wire the secondary 02 to the bung in the J-pipe with a nonfouler?

 

[GiJoe]

I can't see why there would be any problems.

 

[Shadow102]

So, any reason I can't wire the secondary 02 to the bung in the J-pipe with a nonfouler?

only thing with the bung in the j pipe is your going to have to reroute the 02 wiring to the front of the engine. just make sure you zip tie everything up so it doesnt melt on the exhaust or hit the belts in the area. I cant remember if i had to extend the wires or not to do it though

 

[Wagonbacker9]

only thing with the bung in the j pipe is your going to have to reroute the 02 wiring to the front of the engine. just make sure you zip tie everything up so it doesnt melt on the exhaust or hit the belts in the area. I cant remember if i had to extend the wires or not to do it though

from what I've read I need an extention to make it to the bung in the back of the MAM... if I can just get more slack out of it I'll go that way.. I'm just hoping not to have to splice it one way or the other.

 

[We Are Ninja]

This page is 1337.

That is all.