What have you done to your MSP today?
- Thread starter baconbitz
- Start date
FlyinHawaiian
Member
- :
- Mazdaspeed Protege #1460
Replaced my coil packs and wires. Cost me $89 in parts only. While I was at it I cleaned up the engine bay as much as I could, get any salt or road grime from the winter out of there and keep it purrdy. Speaking of purr, the car idles beautifully now. The real test is going to be if it still missfires on the way to work tomorrow. I have a feeling it won't and I'm home free.
Thanks for the advice on it 323!
Thanks for the advice on it 323!
Yeah... it really created quite the buzz back then. Now all our cars do is buzz
LOL
hahaha!(lol)
Yea i was surprised they knew so much. I dont know much about subies just that they got a turbo/boxster engine and awd.
also in the aggressive fitment thread
not too fond of the bright silver, so I will be having them powder coated as planned. The stance is beautiful though. They do rub as expected so gotta give my rear fenders some more attention to fully clear...or just raise it up a 1/4(**** that!)
not too fond of the bright silver, so I will be having them powder coated as planned. The stance is beautiful though. They do rub as expected so gotta give my rear fenders some more attention to fully clear...or just raise it up a 1/4(**** that!)
Laser Blue
Member
- :
- '03.5 Mazdaspeed Protege / Laser Blue Mica
also in the aggressive fitment thread
not too fond of the bright silver, so I will be having them powder coated as planned. The stance is beautiful though. They do rub as expected so gotta give my rear fenders some more attention to fully clear...or just raise it up a 1/4(**** that!)
My guess is that you'll end up needing to do both, if you plan to do much spirited driving... :-(
Looks great though, my Laser brother!
Last edited:
If you got the time read up this thread. Not a mazda but gotta admire the attention to detail and hardwork. Is it just me or the lines of this car resembles our proteges. (thumb)
http://www.lancerregister.com/showthread.php?t=268523
http://www.lancerregister.com/showthread.php?t=268523
- :
- '13 CWP MS3 & '16 Mazda6 GT
hmmm so after shopping around it looks like ebay is going to be the cheapest place to buy my suspension lol
Maybe it's just me, but I really don't trust Ebay with things like that. Even though I baught most of the guns in my collection off of there, Car parts are a risky thing.
Wagonbacker9
Member
- :
- 2004 'Hoe
considering installing my new Forge WGA and catless MAM midpipe tonite...
- :
- '13 CWP MS3 & '16 Mazda6 GT
lol honestly, most everything I've bought car wise I get from ebay.
as long as you're smart about who youre buying from and the fine print in the listing then its no different than buying it off any other online site.
as long as you're smart about who youre buying from and the fine print in the listing then its no different than buying it off any other online site.
Yeah, I guess bad stories are stuck in the back of my head.
Wagonbacker9
Member
- :
- 2004 'Hoe
So, any reason I can't wire the secondary 02 to the bung in the J-pipe with a nonfouler?
only thing with the bung in the j pipe is your going to have to reroute the 02 wiring to the front of the engine. just make sure you zip tie everything up so it doesnt melt on the exhaust or hit the belts in the area. I cant remember if i had to extend the wires or not to do it though
Wagonbacker9
Member
- :
- 2004 'Hoe
from what I've read I need an extention to make it to the bung in the back of the MAM... if I can just get more slack out of it I'll go that way.. I'm just hoping not to have to splice it one way or the other.
We Are Ninja
Member
- :
- 2006 Mazdaspeed 6 GT; 2004 Mazda 6 Wagon
This page is 1337.
That is all.
That is all.
