New lip available for Mazda6 06-08!

[hurricane]

My project is finally done!
A front lip that fit sport bumper for any 2006 2007 2008 Mazda6 with sport bumper.
This lip is an adaptation of original Mazda JDM lip that doesn't fit our bumpers, a custom hand made design from overseas pictures.
I spent more than 200h of work on that. The finishing of the prototype were done by a professional to ensure a perfect finish.
A mold were built and is ready to produce.

Here is pictures of the first unit coming out of the mold, on my own car, before fine adjustments & paint.
#1 (WITHOUT): http://i21.photobucket.com/albums/b272/hurricane_sr/Mazda6%20Lip%20Project/IMG_8415.jpg
#2 : http://i21.photobucket.com/albums/b272/hurricane_sr/Mazda6%20Lip%20Project/IMG_8416.jpg
#3 : http://i21.photobucket.com/albums/b272/hurricane_sr/Mazda6%20Lip%20Project/IMG_8422.jpg
#4 : http://i21.photobucket.com/albums/b272/hurricane_sr/Mazda6%20Lip%20Project/IMG_8426.jpg
#5 : http://i21.photobucket.com/albums/b272/hurricane_sr/Mazda6%20Lip%20Project/IMG_8433.jpg
#6 : http://i21.photobucket.com/albums/b272/hurricane_sr/Mazda6%20Lip%20Project/IMG_8437.jpg
#7 : http://i21.photobucket.com/albums/b272/hurricane_sr/Mazda6%20Lip%20Project/IMG_8463.jpg
#8 : http://i21.photobucket.com/albums/b272/hurricane_sr/Mazda6%20Lip%20Project/IMG_8466.jpg

Specifications:
Part is made of fiberglass, strong enough for road hazards but still flexing to follow bumper deformation.
BLACK gelcoat finish (kind of epoxy surface coat).
Only 3/4" lower ground clearance MAX at the sides, 1/8" MAX at center.
So anybody can drive without any concern even with a big suspension drop.
1.7Kg

If you are interested to get one: Address removed by Blendercloud

 

[vrspeedemon]

very nice indeed sir, I commend you on the good work!

 

[mglavina]

Looks real nice. Great work! If only we could get a custom lip for the Speed6...

 

[hurricane]

Looks real nice. Great work! If only we could get a custom lip for the Speed6...

Thanks! There is no aftermarket option for the MS6?

 

[mglavina]

I've only seen the
Home Depot Racing lip
And the AE or AE replicas
I'd like to see a custom lip similar to this one with the side extentions:

(No thread jack intended)

 

[Blendercloud]

This thread has been closed temporarily because of the intent to market and sell a product by a member who is not of AMM or AV status.

The member will receive a PM regarding how to become an Authorized Vendor or Authorized Merchant Member today.