You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
cobb sri or cp-e nano sri
- Thread starter siny66
- Start date
funksilver07
Member
- :
- 2007 Sunlight Silver Mazdaspeed 3 GT
No diff, choose the one you like to look at... they will give equal results.
H3br3w_Ham3r
Member
- :
- 2008 Mazdaspeed3
I hear that the Cobb support bracket either breaks or breaks the battery tray sometimes. Not sure how true that is. I have the Cobb SRI but I got it locally off a speed6 so he didn't have the bracket for me. I zip tied it in place but, checked tonight and that broke. It runs fine without it though.
bscott2275
Member
- :
- 07 Mazdaspeed3 Cosmic Blue
have cobb sri with bracket attached been about 8 months nothing broken
I have had the pleasure of owning both intakes. Originally I had the CP-e, and I did not notice any differnce from stock. Sold the CP-e, bought the COBB, aqnd man what a difference. The car is beastly now. I think the problem with the CP-e is that the vacum line hose uses the stock plastic elbow, and the connection never feels snug. Seems like potential for a leak. Maybe it is just me, but I definitely feel as thought the COBB has performed better. Maybe someone else that has had both can chime in. Definitely don't listen to the kids that say they are both the same beacause they are talking purely from speculation, not experience.
Darth Vader
Member
The Cobb bracket is heavy duty but, the flimsy piece of 20 gauge its bolted to isn't. One spot weld under the batt tray holds this on and that's what breaks. However, 15 minutes to remove the battery and bat box, drill out the busted spot weld and replace it with a sheet metal screw solved the problem.
Taking out batt box is easy, the front of the box unclips and slides up and out, undo the ECM couplers with a careful flick upward on the loops at their tops undo batt and slide forward and out, 3 10 mm bolts hold the batt box in.
Taking out batt box is easy, the front of the box unclips and slides up and out, undo the ECM couplers with a careful flick upward on the loops at their tops undo batt and slide forward and out, 3 10 mm bolts hold the batt box in.
H3br3w_Ham3r
Member
- :
- 2008 Mazdaspeed3
I recently ordered just the bracket cause I was concerned the MAF sensor was not reading correctly because it was always bouncing around. I just didn't tighten it down as hard as possible. Left a bit of wiggle room to prevent the tray from breaking.
I recently ordered just the bracket cause I was concerned the MAF sensor was not reading correctly because it was always bouncing around. I just didn't tighten it down as hard as possible. Left a bit of wiggle room to prevent the tray from breaking.
how much is it for just the bracket?
Cobb is ASS. From my personal experience viewing someone who had them both, Cobb contributed to knock, poor AFR, deformed workmanship over time, and a PR cock who bit the hand that feeds him. The Nano SRI performs as well if not better, but the piece is quality, durable, works very well with the CPE turbo inlet (just added mine - have had nano about eight months now), and runs smooth and error-free with the rest of the vehicle. No knock, no AFR problems, just a lot of heavy breathing. My .02.
What about the PG SRI? I have little to compare it with other than stock and the CPE CAI, but really I like mine. Just thought I would mention it.
http://siteground207.com/~protegeg/product_info.php?cPath=160_258&products_id=1539
http://siteground207.com/~protegeg/product_info.php?cPath=160_258&products_id=1539
Cobb is ASS. From my personal experience viewing someone who had them both, Cobb contributed to knock, poor AFR, deformed workmanship over time, and a PR cock who bit the hand that feeds him. The Nano SRI performs as well if not better, but the piece is quality, durable, works very well with the CPE turbo inlet (just added mine - have had nano about eight months now), and runs smooth and error-free with the rest of the vehicle. No knock, no AFR problems, just a lot of heavy breathing. My .02.
Viewing somebody who has had them both, and having them both are totally different. I am not a COBB fanboy. I just know from personal experience that my car performs better with the COBB. Anyways, you seem to have a bitter taste for COBB, and seem to be all over CP-e, that's cool, but bias will not help this guy make his decision.
H3br3w_Ham3r
Member
- :
- 2008 Mazdaspeed3
how much is it for just the bracket?
I tried to get just the bracket but couldn't find any way to buy it alone. So I bought the SU red Cobb SRI and found out they were on back order. I told Mark that I only wanted the red tube, bracket, and red K&N Filter because I already had the mass airflow sensor housing. He cut the price about half and sent me only what I needed.
Viewing somebody who has had them both, and having them both are totally different. I am not a COBB fanboy. I just know from personal experience that my car performs better with the COBB. Anyways, you seem to have a bitter taste for COBB, and seem to be all over CP-e, that's cool, but bias will not help this guy make his decision.
Yes, but the person in question is my life partner. (spank)
cobb vs. cpe used to be the best argument - now that cobb is bailing on parts for the ms3 -and only supporting the tuning - it's not so much - i have the hks and love it because the filter is dry, comes off easy for cleaning, and i've never had one issue with it
New Posts and Comments
- Replies
- 14
- Views
- 582
- Replies
- 102
- Views
- 44K
