What have you done to your Miata today?

[JDM-P5]

<a href="http://picasaweb.google.com/lh/photo/w9wYUsEEzGIrDSSHkfdEKg?feat=embedwebsite"><img src="http://lh3.ggpht.com/_BxFtmy0I1Y8/SZmD-YLM4EI/AAAAAAAAEjM/WJgLnZ9cE5o/s800/DSC03381.JPG" /></a>
I like it better like this.

 

[jmsj578]

I checked on the Miata, yesterday. The painter just finished a job for another customer and can now give mine full time attention. He's already sanded and filled the dings in the trunk and right side. Those should be getting primer, shortly. It sure looks ugly, right now.

 

[Reitrof]

Added a rear spoiler

 

[JDM-P5]

Added a rear spoiler

Nice!

Short [no] shifter installed.
<table style="width:auto;"><tr><td><a href="http://picasaweb.google.com/lh/photo/6JOUb3wBVhHTyadur1d0kQ?feat=embedwebsite"><img src="http://lh6.ggpht.com/_BxFtmy0I1Y8/SZsTNZ2NzKI/AAAAAAAAEnI/YeSIVSb4IAM/s800/DSC03386.JPG" /></a>

Trunk teaser.
<a href="http://picasaweb.google.com/lh/photo/LBCX5sc59qgUTgwVcAvkvw?feat=embedwebsite"><img src="http://lh3.ggpht.com/_BxFtmy0I1Y8/SZsTOA-X45I/AAAAAAAAEng/zy33fAl3cDg/s800/DSC03389.JPG" /></a>
(eekdance)

 

[Reitrof]

Nice!

Short [no] shifter installed.

<TABLE style="WIDTH: auto"><TBODY><TR><TD>

(eekdance)

</TR></TBODY></TABLE>
Thanks. What's sticking out of the radio? USB Stick?

 

[JDM-P5]

</TR></TBODY></TABLE>
Thanks. What's sticking out of the radio? USB Stick?

No prob.
Yep...the new headunit has ipod connection in the rear and usb up front.
I must say, the usb is crazy convinient!

 

[Travizzle21]

Just ordered my (authentic) racing beat intake, as well as some other stuff. It hurts the wallet(ughdance)

 

[JDM-P5]

Started the Deregisteration process to get the car out of the country today.
No plates.
No license.
No insurance.
No more driving.

I is sad... :*

 

[Travizzle21]

That sounds sad, but at least youre one step closer to comin back!

 

[Reitrof]

My new (used) Beatrush front strut brace came in today, so I installed it tonite.

 

[Travizzle21]

My new (used) Beatrush front strut brace came in today, so I installed it tonite.

Nice!(rockon) Driven some twisties yet? notice any difference?

 

[TieNN89]

New Rotors and Pads didn't get to put new fluid it will do tomorrow

Here some left side pics

 

[aMaff]

Tuesday night I had the cracked header welded, yesterday we swapped bushings between the old and new control arms and made a greasy mess, put the new rear lower arms on, swapped the new top hats on the shocks and put the header back on. Today we'll be swapping the rear spindles back on (new wheel bearings / extended studs) and putting the rest of the exhaust on. After that it's a matter of setting the ride heights and getting the rear alignment somewhat back to where it was lol

 

[aMaff]

AZNTieN, I like those wheels. What are they?

 

[JDM-P5]

Center cap says Buddy Club...?

 

[Reitrof]

Nice!(rockon) Driven some twisties yet? notice any difference?

Short commute, only 3.5 miles. I had the stock one before so I don't expect too much if any difference. Just liked the look better than stock.

 

[Travizzle21]

New Rotors and Pads didn't get to put new fluid it will do tomorrow

(cool) Always nice to be able to stop when you want to lol

Tuesday night I had the cracked header welded, yesterday we swapped bushings between the old and new control arms and made a greasy mess, put the new rear lower arms on, swapped the new top hats on the shocks and put the header back on. Today we'll be swapping the rear spindles back on (new wheel bearings / extended studs) and putting the rest of the exhaust on. After that it's a matter of setting the ride heights and getting the rear alignment somewhat back to where it was lol

Man, you were/ are going to be busy. lol Was all this (preventative) maintenance or upgrades?

Short commute, only 3.5 miles. I had the stock one before so I don't expect too much if any difference. Just liked the look better than stock.

Oh i see. It does look good (thumb)

 

[aMaff]

Man, you were/ are going to be busy. lol Was all this (preventative) maintenance or upgrades?

It was fixing stuff that was broken. Post to come soon

 

[aMaff]

Finally got all the bushings swapped over to the good rear lower control arms last night. This morning I grabbed the re-packed hubs / spindles from Korey. Came back to the house and started putting bolts into holes

Rear suspension's back together; new top hats, lower conrol arms, studs and wheel bearings

Header's back in.

Replaced the cat, re-painted the cat-back w/ high heat flat black

 

[JDM-P5]

Looking good Andrew!
what setup for suspension?