Aftermarket harness/belts?

[H3br3w_Ham3r]

Anyone running aftermarket belts? I'm a frequent at the track and I would like something to hold me down better. Tell me what you are running. Pics would be even better.

 

[H3br3w_Ham3r]

No one has an aftermarket harness?

 

[bykeryder4life]

not that I have seen or heard of. Make a set and post pics!... Get a bar secured across the width of the car behind your seats and fasten some harnesses to it.

 

[Rotus8]

not that I have seen or heard of. Make a set and post pics!... Get a bar secured across the width of the car behind your seats and fasten some harnesses to it.

You don't have to get that radical, you can get a harness that clips into the rear seat belts.

 

[Kain]

In the meantime, a CG lock would suffice.

 

[Mike240SX]

If you're considering running 4+ point belts, look into how you really should have a cage or at least a roll bar. In a roll-over situation with the roof potentially caving in, when you have 3 point belts your body has the ability to move to the side. With 4+ point belts, you're stuck vertical. Something to think about.

 

[H3br3w_Ham3r]

You don't have to get that radical, you can get a harness that clips into the rear seat belts.

I've been looking for some but haven't had any luck....

 

[turbo23]

Here ya go, but I would recommend a aftermarket seat http://www.soloracer.com/rallye4.html

 

[GoFast]

get ahold of the OP in this thread and see where he got his from

http://www.mazdas247.com/forum/showthread.php?t=123729245

 

[H3br3w_Ham3r]

get ahold of the OP in this thread and see where he got his from

http://www.mazdas247.com/forum/showthread.php?t=123729245

For anyone that wants to know... He got his harness bar from Sparco and it was for an 02 WRX but the measurements are the same