wheel fitment question

[slideshow240]

si senior ha ha

 

[A louie]

I am going to be running either 7.5-8 with +40 offset.

If I want less, I can just get spacers!!

 

[slideshow240]

thats what im doing. after polishing the wheels and smaller tires. and maybe pulling the rear 1/4 panels. and alot o camber on the BC coilovers with fat spacers out front. HAVE TO!

 

[AlturredMP5]

hey slideshow, your sig has a burnt out plate light.

ok, since offset is the thing i most misunderstand about wheels, will i tuck or sit flush with a +40 offset? i wouldnt mind sitting flush w/ no camber.

 

[A louie]

You will need camber to slam/ possible lower with +40.

If you plan on keeping stock ride height, +40 should be find

 

[slideshow240]

hey slideshow, your sig has a burnt out plate light.

ok, since offset is the thing i most misunderstand about wheels, will i tuck or sit flush with a +40 offset? i wouldnt mind sitting flush w/ no camber.

its ok...its an old pic and i noticed ha ha
slam and 17x8 or 18x8 +40 ftw! go with a 215/40 or 205/40 tire if you want that strected look. do it!

 

[AlturredMP5]

its ok...its an old pic and i noticed ha ha
slam and 17x8 or 18x8 +40 ftw! go with a 215/40 or 205/40 tire if you want that strected look. do it!

i had been considering buying your works if theyre still for sell. all the VIP guys here in beaumont are pushing me to do it. are the ones on the P5 the more concave ones, or are the concaves on the two farty? im just more of a lip guy, i like the deep dish look. thats what the TSW Jaramas have.

im also considering these BC coilovers. if i had camber, id def get the 215/40s.

 

[slideshow240]

the wheels are no longer for sale. im going 195/45/17's yes in 17's and polishing them. sorry man. if you still wanna buy them after tires and polish price is going to be a wee bit steeper. but i have BC coilovers and i LOVE them! get em...then get wheels. trust me. its better to be low on stock wheels then high on nice wheels

 

[AlturredMP5]

the wheels are no longer for sale. im going 195/45/17's yes in 17's and polishing them. sorry man. if you still wanna buy them after tires and polish price is going to be a wee bit steeper. but i have BC coilovers and i LOVE them! get em...then get wheels. trust me. its better to be low on stock wheels then high on nice wheels

my sentiments exactly. i dont think the stock wheels look bad. i have chrome 2002 rims (i miss my stock painted 2003s), and it wouldnt look bad slammed. what is the lowest point of those BCs in inches or mm's? if its not low enough, im bagging the biotch.

 

[slideshow240]

it will go low enough. just take the bottom 2 perches out of the front coilovers ha ha. i did but waiting to go lower for polished wheels and smaller tires/spacers. and the rear coilovers on all cars are "dump" capable lol

 

[mp3-79bronco]

i have 17x7 40mm and they rubbed in the back on my mp3 before i tapped the fenders a little... tire size is 205 40 17...

 

[mp3-79bronco]

and i am slammed on eibachs..

 

[A louie]

lol @ slammed on eibachs

 

[AlturredMP5]

lol @ slammed on eibachs

well, at least hes lower than i am.

i think the sedans have a bigger problem with rubbing in the back than the wagons do, but i could be wrong. its happened once before.

 

[A louie]

Sedans have more space in the rear actually haha

 

[slideshow240]

ha haaaaaaa slammed on eibachs

and im slammed on tokico and stock springs!

 

[AlturredMP5]

Sedans have more space in the rear actually haha

so will i rub w/ the BC coilovers in the back?

 

[AlturredMP5]

lol at slideshows new sig lol

 

[phoenix323]

what about +38? on a wagon? looking to do an inch drop

 

[A louie]

so will i rub w/ the BC coilovers in the back?

Not if you run camber and roll/pull your fenders.

Thats the good thing about coilovers, you can make a lot of things fit because of adjustments