Ventpod Group Buy Feeler!

[Radioactive3]

bump

 

[Moultese]

Anyway we can get on some mailing list so that we are contacted when they become available for purchase?

 

[Levitron]

Anyway we can get on some mailing list so that we are contacted when they become available for purchase?

Sub to this thread?

 

[Moultese]

I'm subscribed to this thread, but I can't always check the forum out, and if I were to get an email every time someone replies to the thread, that'd be ridiculous. It'd be nice to have a mailing list and either Elbows or the RPM store send out a mass e-mail to all those interested.

 

[MAZDARacing2007]

i agree^^

 

[ComeBack]

Yea I'd like a mailing list as well, or a pm list either way would be cool.

 

[Rotus]

I'm thinking the first 20 people on the list should be comped

 

[Elbows-High]

I should be able to mass PM everyone on my "Buddy List", right? If so, I'll add everyone to my list and PM you when they're available.
How's that sound?

 

[ComeBack]

I should be able to mass PM everyone on my "Buddy List", right? If so, I'll add everyone to my list and PM you when they're available.
How's that sound?

i like that =]

 

[Moultese]

I should be able to mass PM everyone on my "Buddy List", right? If so, I'll add everyone to my list and PM you when they're available.
How's that sound?

It sounds good, but I believe on this forum software you can only send out 5 PMs at a time, where as with e-mail you could send out a million at a time. Just a thought.

 

[ballesteros_91]

**MOD EDIT**

This is a product interest thread only. Vendor needed 100 people interested in product to begin contruction, this number has been reached and production has begun. ElbowsHigh will be selling these products through TheRPMstore.com. When product is available and pricing has been finalized, there will be an announcement and a link for where to purchase the product. Please do not add your name to the list as it is no longer necessary. Thanks to everyone for their patience.


A ventpod system that allows the gauge to sit inside the vent but allows air to pass freely by. I know some individuals dont like the look of pillar gauge pods or pods that place the gauge in front of the instroment panel. This group purchase is based on commitment. Since its a smaller company looking to get things rolling in the Mazda3 community. If we can get upwards of 100 to commit we can get things started.

Prices are estimated to be around the same. If you are Interested please send me a PM or post here.

These pods will be similar to the roush vent pod:

Let me know!

EDIT: This is just a feeler and am working with Elbows-High through the proper steps to get this approved.



Interested So far:

1) Munnugles_______________51) devildoc
2) spec2k5________________ 52) thanotosq
3) Absent-Minded(x2)________53) Brets3
4) RUKnight________________54) OnThePipe
5) nytmar3________________|55) Akaveli
6) ericrapp(x2)_____________|56) Darksun280
7) pipmoutprog5(x2)_________57) walti
8) shadow1________________58) Scott
9) supergoose______________59) gtlaw
10) GI is my Hero___________60) whaiken
11) chacon101_____________61) najjar22
12) jbiird317_______________62) vasaribm
13) yager_________________|63) gr81 Mazdaspeed
14) houpro5_______________|64) AG DesignWorks
15) lamp3_________________|65) VRMS6
16) daonly1around__________|66) Kain
17) xcoldr1cex_____________|67) AlbanianDude
18) SSMS3________________|68) Jessed87
19) SPEEDYHANS___________|69) iamslav3
20) TheDoc (x2)____________|70) Speed3Rookie (x2)
21) RocaLoca______________|71) zilch321
22) benben01
23) QuicklyCosmic
24) Jasnall
25) Nburvi1
26) TurboDreams
27) 07SilverSpeed6
28) blake_peanut
29) Shane5425
30) Steve00
31) tunersteve
32) Antoniogut
33) Bonafide_Spd3
34) Larimer
35) Eracer
36) BulldogSRT
37) stephani3
38) mazpro
39) xandrake
40) Gvr4-330
41) richmusch
42) mazdaspeedster3
43) Gmac03
44) UHATEIT
45) wisniaPl
46) Super X
47) JCurry
48) oskinosmee
49) D_Roc7822
50) knyghtryda
51)ballesteros_91





The second thumbnail:

 

[Elbows-High]

Just the latest news...

I picked up a few dozen pods today. I walked in about an hour after he began running the parts. He's really taking great care to make sure these come out as good as possible. He hand pulls each part after the press cycles so as to not allow any scarring of the "ring face" that may typically occur when ejecting parts into a shute. He's also bathing them in cold water right after they come off the press to control shrinkage.
I am quite pumped, as I'm sure you all will be.
I will be painting the first batch for The RPM Store this weekend. As soon as they get there, I'm sure Donny will be "releasing" them to all y'all!
Stay tuned....more to come.

 

[Kain]

He's also bathing them in cold water right after they come off the press to control shrinkage.

"I was in the pool! I was in the pool!"

 

[logik816]

dude, can't wait. add me to the list. i want to pick one up as soon as they come out.

 

[tunersteve]

"I was in the pool! I was in the pool!"

I was thinking the same thing when I read that. Awesome!

 

[def_one]

Like a frightened turtle!

 

[Elbows-High]

Okay folks....I have the first batch in my possession!! Now I just have to get them painted and boxed up and sent to Donny. I should be able to get this done no later than 12/8/08. From there, it's just a matter of Donny getting them into his system and filling orders.

I'll post back when the birds have flown.

 

[jbiird317]

merry christmas to my ms3!!!

 

[ms6utah]

I'm ready to order. More than just one. probably 15 or so. RaceTech

 

[jbiird317]

I'm ready to order. More than just one. probably 15 or so. RaceTech

you sir must wait to order all 15, save some for the rest of us!