What have you done to your MS3 today?

[DaleNixon]

I installed my new HKS intake!

 

[skubidoobie]

You didn't wait for the Nano? Well at least write up a review for that bad boy.

 

[03.5-dc-speed]

Independent fog light mod. You can have them on whenever you want. For instance, my new amber fogs match the running lights, so I can have running lights and ambers on without my headlights. If you can do even simple wiring, it's very easy. PM if you want me to send you the diy I used

Nighttime, gonna get better pics tomorrow

do you by chance know how to keep the side markers on and have em still blink when you turn?

 

[lestat13]

I remember someone did that a while ago... and by a while ago I mean like 6 months ago.

Ah found it but no more pics and I don't think theres a diy in there... try to email the guy

http://www.mazdas247.com/forum/showthread.php?t=123713841&highlight=god+status

 

[mrjoshyman]

Independent fog light mod. You can have them on whenever you want. For instance, my new amber fogs match the running lights, so I can have running lights and ambers on without my headlights. If you can do even simple wiring, it's very easy. PM if you want me to send you the diy I used

Nighttime, gonna get better pics tomorrow

looks great. i dont really understand the point of just having the running lights/fogs on and not the headlights though?

Ok..here are a couple. Very dark outside tho...

And I washed the car too. Looks so much better without the side moldings

very nice..whats % is that?

 

[mr_mazda329]

Its 25% all the way around

 

[chief_wiggum]

Installed my CP-E Nano SRI -- delicious.

 

[boosted1]

I installed my Nano SRI. OOps, that was yesterday.

 

[logik816]

colored my fuel door to match my true red. will put on car tomorrow. still drying.

 

[RADAR THIS]

towplate on...

 

[Super Unique]

rotated tires, scrubbed wheels completely while doing so, inside and out.

Boring stuff like full interior detail and leather conditioning. Preparing car for cross country trip this week. Washed, clay bar and wax on the outside. clean/wax door jams.... looks like new again.

 

[stephani3]

shift knob

 

[Velocifero]

That is pretty sweet, where'd you get it? ^^^^

 

[stephani3]

street unit.

 

[Kain]

Most people get the black knob. Why'd you pick silver? Can you get some close-up shots from the side and back?

 

[stephani3]

Most people get the black knob.

I picked silver for that exact reason

also i have the silver dash trim from an 04 2.3... the fakeish carbon fiber looking strip (ricer) also it matches the seats and other dash pieces.

i'll get some more pics later =)

 

[UHATEIT]

ETS TMIC last night, bought it locally from the FS thread and swapped my stocker for it plussome cash. Initial drive of it the car pulls like hell once I get past 3000 rpm, obviously the car usually pulls around their anyways, but pulls more than it did before.

As everyone says about their mods, takes like 10 start ups and drives to get the car used to the part, We'll see if it gets any better after driving it more. But initial startup and driving home it was very very nice

 

[lestat13]

ETS TMIC last night, bought it locally from the FS thread and swapped my stocker for it plussome cash. Initial drive of it the car pulls like hell once I get past 3000 rpm, obviously the car usually pulls around their anyways, but pulls more than it did before.

As everyone says about their mods, takes like 10 start ups and drives to get the car used to the part, We'll see if it gets any better after driving it more. But initial startup and driving home it was very very nice

It's kind of hit and miss, but now with my ets I am getting boost cut bad. It either pulls hella hard with no issues.... OR I spike and hold 20 or creep upto it and hit cut hard. UHATEIT, lemme know if you start getting the same issue.

 

[Babyface13]

I installed the Hotchkis rear sway bar and the cpe center gauge pod today!

 

[wisniaPl]

It's kind of hit and miss, but now with my ets I am getting boost cut bad. It either pulls hella hard with no issues.... OR I spike and hold 20 or creep upto it and hit cut hard. UHATEIT, lemme know if you start getting the same issue.

get a tune and problem is solved