What have you done to your MSP today?

[Mazdaspeed2oo35]

Finally today i've done my custom 4" Aluminum Intake System... Now my Intake Filter is not going to suck the insane hot air from radiator fans and turbo temperatures, I think came out pretty damn good, also relocated my Euro Spec Protege 5 Coolant Can next to the Battery, Let me know what you guys thinks..


Engine Bay & Intake Before:

Custom 4" Intake System With Injen Hydron Shield.

Relocated Euro Spec Protege 5 Coolant Can Bracket

Engine Bay, Relocated Coolant Can & Intake System with Injen Hydroshield After:

Lots of pictures but hey Pictures are better than 1000 words....

 

[livelyjay]

...also relocated my Euro Spec Protege 5 Coolant Can next to the Battery, Let me know what you guys thinks..

Eh, not feeling the coolant tank in that spot. Tough to get everything in there though. You might want to consider dropping that battery in the trunk to free up engine compartment space. Otherwise looking good.

This weekend the MSP gets it's 6 month oil change, as well as an overdue transmission fluid change, new wipers, and new plugs.

 

[2.0t03speed]

paint that white tube please. O and btw the motors in the car..... just have to try and clock the 28rs compressor housing while its on the car this should be interesing

 

[speed1016]

Looks great!! Where did you get your gounding cables?

 

[CantCMe]

Gorgeous man...

 

[Mazdaspeed2oo35]

paint that white tube please. O and btw the motors in the car..... just have to try and clock the 28rs compressor housing while its on the car this should be interesing

I'am Ryan. Im just going to take it to a body shop to paint it the same color of my car and engine cover.. I really don't want to spray paint it, This intake is in Full aluminum piping, and painting it with spray will end up like an ass and with fingerprints all over it, once i have to install it back... so far i like it alot how it came out. infinite better than the one i did before, hahaha you know from what and how i did it.... also i had no other space to relocate my coolant can, i ran out of space in the engine bay, and is a really a pain in the ass to relocate my battery to the trunk cause in the trunk i don't have space either with GTspec Trunk Cage, Methanol Kit, and when i do my custom sound system...

 

[Mazdaspeed2oo35]

Looks great!! Where did you get your gounding cables?

That's HKS Ground Cabling System... I have to redo my ground wires i currently have none, TBK ****** all of my cables terminals and lost few of them, so i removed the ones i had, and i'm just going to redo it again but this time better.

 

[2.0t03speed]

that intake looks like plastic not alumnium

 

[Mazdaspeed2oo35]

Eh, not feeling the coolant tank in that spot. Tough to get everything in there though. You might want to consider dropping that battery in the trunk to free up engine compartment space. Otherwise looking good.

This weekend the MSP gets it's 6 month oil change, as well as an overdue transmission fluid change, new wipers, and new plugs.

Well I don't think the Coolant Can is that bad man.. I sure don't have any other place to put it in the Engine bay, I have no space in the trunk to relocate my Battery... I guess everything can't be perfect or look perfect... I'm still cleaning and relocating things in my engine bay to make it look better.. I can't wait to have my Chrome 505zoom Intake Manifold.. goshhhhhhhh Rich hurry the hell up !!!!!!!!!!!!

 

[Mazdaspeed2oo35]

that intake looks like plastic not alumnium

Well, Is Aluminum, not plastic.. everything you see in there is full alumimun, they just come in that color. which makes it look like plastic

 

[qikslvr2006]

Sweet yo(idhitit)

Yo Mazdaspeed2oo35 sorry I haven't been on aim. I have been collecting a good pile of stuff for my car lol. plus I am hoping that the ca will be painted this weekend or next. then I just got a couple more things for the suspension. I also remember telling you that I was going to wait till next year to start my motor build. But I snatched up some stuff already, I'll get on soon or pm you to tell you more.

You know you will be (second) when my cars done right? hahahaha just playin yo(peep)

Plus I have been working on my mod list, plus a mod list with pricing. It's outrageous hahaha I'll send it to you. where did you get that piping you used for the intake? it looks like good stuff. plus the rubber seal inside sweetness. ok I'll try and get on soon. home your still on.

 

[Mazdaspeed2oo35]

Sweet yo(idhitit)

Yo Mazdaspeed2oo35 sorry I haven't been on aim. I have been collecting a good pile of stuff for my car lol. plus I am hoping that the ca will be painted this weekend or next. then I just got a couple more things for the suspension. I also remember telling you that I was going to wait till next year to start my motor build. But I snatched up some stuff already, I'll get on soon or pm you to tell you more.

You know you will be (second) when my cars done right? hahahaha just playin yo(peep)

Plus I have been working on my mod list, plus a mod list with pricing. It's outrageous hahaha I'll send it to you. where did you get that piping you used for the intake? it looks like good stuff. plus the rubber seal inside sweetness. ok I'll try and get on soon. home your still on.

I hear you man.. I know your car is going to be pretty damn sick when you finish it, I'll be more than glad to help you on anything you might need.


Bro, the only place i have found this pipes were something Called Leroy Merling, that's like Home depot in here, they use this pipes for Dryer machine exhaust, they use this pipes to route the exhaust gasses out of the house, they look like plastic but everything you see is aluminum, plus you don't need to use or glue them together, that rubber you see inside seals them and holds them together and are heat proof, BTW I didn't wanted to spray paint it because they'll look like s***, I going to take my Intake to a body shop to get it painted nicely. something that is not going to have s*** load of fingerprints when i put it back together.. is so hard here and USA to get an Intake with the dimensions i need. 4" Piping ain't that easy to find.. i think it came out good, and is better than having the filter right there eating rad fans hot air..

 

[neox.286]

looks great bro! keep up the awesome work, your car is an inspiration to me lol

 

[pluto316]

I thought about buying a MSP again today then I remembered what it was like to own one.

 

[Mazdaspeed2oo35]

looks great bro! keep up the awesome work, your car is an inspiration to me lol

Hey Neox those are some serious words your are saying here... I never expected from anyone to tell me this kind of things... I really appreciate it man, those words mean alot to me, you just don't know how much... Thanks bro..

 

[neox.286]

no problem bro

but lol, thanks to you now I've raised my horsepower goals haha
yay for money pits >.<

 

[bruster4_5]

i tinted my taillights and corners after i got off work today as well as installed the weapon r billet coolant tank ill try to get pics up tomorrow

 

[Ricktalife]

hey neox / Mazdaspeed2oo35 i was told a few days ago on another forum that upgrading the turbo on the msp can destroy the stock tranny is that true?

 

[mspHtown]

hey neox / Mazdaspeed2oo35 i was told a few days ago on another forum that upgrading the turbo on the msp can destroy the stock tranny is that true?

thats why most ppl with a msp remove the stock turbo and run N/A

 

[skittle]

i broke my car today i think its my difrential if thats how you spell it. it wont move im mad no more driving for a while this sucks