Steering Wheel Controls Don't Work!!!

[laserblueP5]

I Recently Tried installing a Peswips in my car to control my aftermarket radio with my factory SWC buttons. After Failing To Program the Buttons I Decided To Try The SWC With My Factory Radio. No Surprise There They Still Don't Work.

Anybody Know Where The System Could Be Defective???

Thanks In Advance!!!

 

[twowings]

I know where I would start trouble-shooting......the connectors into the fuse block...make sure they are seated correctly and locked down.....

Retrace all the steps you took in the install and double and triple-check each step.....it's likely something simple...good luck !

 

[714ms3]

I know where I would start trouble-shooting......the connectors into the fuse block...make sure they are seated correctly and locked down.....

Retrace all the steps you took in the install and double and triple-check each step.....it's likely something simple...good luck !

Isn't it always the most simple mistakes that end up taking the longest to figure out. I am a computer technician, and I often see around the industry that people tend to look for the hardest solution first instead of the easiest.
On a side note, this pain medication they gave me for my back is making me delirious, and I have never posted so much in one morning - I hope it never runs out.

 

[twowings]

Isn't it always the most simple mistakes that end up taking the longest to figure out. I am a computer technician, and I often see around the industry that people tend to look for the hardest solution first instead of the easiest.
On a side note, this pain medication they gave me for my back is making me delirious, and I have never posted so much in one morning - I hope it never runs out.

Yep, did tech support for Novell & HP way back in the day....know exactly what you mean....


about the pain meds, too......love that Demerol ! (guitar)

 

[AutoSoundCentral]

I Recently Tried installing a Peswips in my car to control my aftermarket radio with my factory SWC buttons. After Failing To Program the Buttons I Decided To Try The SWC With My Factory Radio. No Surprise There They Still Don't Work.

Anybody Know Where The System Could Be Defective???

Thanks In Advance!!!

That does not sound right since you can not use the PESWIPS on a factory radio. Make sure your radio is compatible, the wire and plug is connected properly, and its programmed right. You can also go to www.pac-audio.com for wiring info since they are the same adapters.

 

[heman]

I have the same problem could you guys tell me which color wire is for 2004 mazda3 steering wheel controls is ? or witch pin ? i have 24 pin connector.

 

[usrtdsl]

Pin 9 should be Brown with a Yellow Stripe and Silver Dots. That's the steering wheel control. I installed the SWI-Jack and you have to also ground pin 10 which is White with a Black Stripe and Silver Dots as well. Don't know if this is true for yours or not.