Mazda Protege Owner Photos

[xDJ DUBx]

I don't want to, I already have about 10 holes per side from my bc2 sides =/

 

[daonly1around]

I don't want to, I already have about 10 holes per side from my bc2 sides =/

they didn't use the stock holes that the P5 and msp used?

 

[xDJ DUBx]

You ever seen the bc2 sides off the car? NOTHING like the stock sides. The stock sides curve with the body of the car, the bc2 sides don't, they just drop straight down...

These are actually the ones I use to have on my car, anyways, you see how there is a small lip across the top? Well the way they were on my car was with 2 screws on both ends in the fender wells and several screws through that lip across the top into the door jams.

 

[daonly1around]

You ever seen the bc2 sides off the car? NOTHING like the stock sides. The stock sides curve with the body of the car, the bc2 sides don't, they just drop straight down...

These are actually the ones I used to have on my car, anyways, you see how there is a small lip across the top? Well the way they were on my car was with 2 screws on both ends in the fender wells and several screws through that lip across the top into the door jams.

ouch....

 

[xDJ DUBx]

Seriously.

 

[jeg0024]

Just seen the other pics, looks good with the yellow overlays, good job jeg!

Thanks! You like the look? Sorry I didn't go smoked...

Seriously.

For real? lol

 

[xDJ DUBx]

haha, its cool man, I actually think the yellow looks better than smoked would.

 

[jeg0024]

Thx

 

[chicohond@91]

Thanks! I just found out about this parking garage today! Its like 2 mins from my house in downtown. I know I have been a pic ***** today but I love this pic and how it came out after some PS so I have to post it here...

sweet picture..

 

[Falango]

You ever seen the bc2 sides off the car? NOTHING like the stock sides. The stock sides curve with the body of the car, the bc2 sides don't, they just drop straight down...


These are actually the ones I use to have on my car, anyways, you see how there is a small lip across the top? Well the way they were on my car was with 2 screws on both ends in the fender wells and several screws through that lip across the top into the door jams.

Screws, yuck!! Mine are glued along the top, and one screw at the back, one at the front. Had to get the tops shaved on the inside so the doors didn't rub them. Also, I had 3 brackets made to secure it underneath, to the frame. They are hard as a rock, no movement in the skirts at all.

 

[jeg0024]

sweet picture..

Thanks

 

[killermatt]

jeg i want your car now!!! it looks smexy ;p
haha
and d-rock looks good with no primer now haha

 

[jeg0024]

jeg i want your car now!!! it looks smexy ;p
haha
and d-rock looks good with no primer now haha

lol, give me $6k!!! Thanks for the comments

 

[xDJ DUBx]

Screws, yuck!! Mine are glued along the top, and one screw at the back, one at the front. Had to get the tops shaved on the inside so the doors didn't rub them. Also, I had 3 brackets made to secure it underneath, to the frame. They are hard as a rock, no movement in the skirts at all.

I had an idiot install my skirts, thats why it was mounted in such a ****** up way.

 

[THE Phen]

 

[_ERIC]

got this taken on a vw cruise....

 

[xDJ DUBx]

^^^looks good!!

 

[red95_240sx]

 

[killermatt]

just changed the oil and tranny fluid i feels like a load off, been saying im going to for like 3 weeks.

but my cel is still on :[ my cilonide D is in the "stuck on" position (dunno) not sure how to fix

 

[red95_240sx]

ive never changed my tran fluid. i dont think i ever will...