What have you done to your MSP today?

[69RMSP]

I said ppl are blowing motors of the speed 6.. silly wabbit

only if you are running 10 psi or higher on stock motor. if you have forged rods and aftermarket turbo you should be fine, or if running below 10 psi you will be fine.

 

[evilmonkeyMSP]

oh, forgot to mention...as of last night my Greddy Full auto TT has decided to work properly again. For a while it would not allow me to select different options nor would it store the saved run time on the car was started from the last time...

now it works perfectly after i messed with it for a couple seconds lol

No I need to find out what color the speed wire was again and finally hook that up lol

 

[MSP608]

^^This is why I love this forum.

 

[Shadow102]

Pulled the trans on the MSP for the second time in a month span

 

[Gasological]

Wife borrowed the car, and now it's idling oddly. RPM will dip at a dead stop occasionally, and I've had it stall while rolling in neutral. WTF did she do to the love of my life?

 

[kamon8404]

I am about to go clean my baby out

 

[terbow]

Pulled the trans on the MSP for the second time in a month span

what are you doing to the poor thing?

 

[Shadow102]

what are you doing to the poor thing?

well after having the bearing explode in it not too long ago i changed the gearset and case with another one that was sitting around...repaired a broken bearing and swapped another bearing from my gear set...well i should have replaced all the bearings because there is another bearing that is bad so the trans had to come back out and i gotta go back through and change more bearings

 

[terbow]

well after having the bearing explode in it not too long ago i changed the gearset and case with another one that was sitting around...repaired a broken bearing and swapped another bearing from my gear set...well i should have replaced all the bearings because there is another bearing that is bad so the trans had to come back out and i gotta go back through and change more bearings

doh! at least u know what it is, and don't have to spend alot more.

 

[25FConv]

I finally got a hold of a set of mazdaspeed door sills and put them in the car.

 

[mgerst1]

anyone know if lined vaccum lines have any advantage over unlined ones? i am buying vac lines and they have lined and unlined

 

[evilmonkeyMSP]

Lol what ever do you mean?

^^This is why I love this forum.

 

[msptn03]

painted calipers red! check it Front

Back

 

[kamon8404]

^ I am going to paint my calipers orange ... i cant wait.

 

[mazdaspeedwerx]

I looked at mine and got a little pissed.

 

[msptn03]

lol why is that?

 

[sandspeed]

Wash and some pics =)

Observe the clean drop compared to the pontiac to the left

 

[Mazdaspeed2oo35]

Wash and some pics =)

Observe the clean drop compared to the pontiac to the left

Nice and Clean like Always Sander... black on gold looks sweet !!!!

 

[Castig3]

nice car sand speed, really nice car looks clean, has the "don't f with me" look

 

[69RMSP]

sand get some effin videos.