GT3071R Bolt On Turbo Kit for Mazdaspeed 3

[mazdaspeedjay]

any info on using this turbo with a basicly stock car. i.e. just a DP but stock exhaust and just the 3 " inlet what mods were done to the car on that 365HP pull ?. Any info on the 3" inlet causing problems with the maf readings and such. what are you guys using to tune this for the time being. CP-E stand back ? i'm still waiting for cobbs programmer to come out like everyone think that will work well with this set-up. I'm just really curious about this turbo and who is using it since the thread got changed to people talking about race gas.

 

[nypest]

any info on using this turbo with a basicly stock car. i.e. just a DP but stock exhaust and just the 3 " inlet what mods were done to the car on that 365HP pull ?. Any info on the 3" inlet causing problems with the maf readings and such. what are you guys using to tune this for the time being. CP-E stand back ? i'm still waiting for cobbs programmer to come out like everyone think that will work well with this set-up. I'm just really curious about this turbo and who is using it since the thread got changed to people talking about race gas.

There are a few guys running the atp inlet with sucess. I trird it but didnt like the fitment with the SRI so i returned it.

 

[redrocketz]

Jorge is pretty much that man! He tuned my STi like 5 times with 5 different setups (second)

He will be tuning my MS3 as well, if he decides to get the tuning software.

he used an Xede with great success. granted he used our computer though. We did a joint tuning on Jason's car with him.

 

[Dream]

he used an Xede with great success. granted he used our computer though. We did a joint tuning on Jason's car with him.

I would be willing to bet he's one of the best Cobb tuners in the county, and he's only about 7 hours from my house (rofl)

 

[redrocketz]

I would be willing to bet he's one of the best Cobb tuners in the county, and he's only about 7 hours from my house (rofl)

they are about 45 minutes from us we use them for the AWD dyno.

 

[staples187]

I think it will be interesting to see people ordering the turbo in the future and to see what the motor can actually handle with a proper tune. Trial and error is the only way to prove the amount of abuse the DISI can take. TurboXS blew their motor at 330whp and now people are saying you can run stock internals up to 350-370whp.

Then again, there's a speed 6 with the same turbo making close to 340whp with stock internals and not having any problems so far.

I'm really considering biting the bullet and doing the turbo upgrade, but am weary of pulling the motor to build it since it's going to be a total b****.

 

[palerider]

TurboXS blew their motor?

 

[Haltech]

Yup, it was awhile ago.. goes to show you that the MS6/MS3 have different ECU controls and parameters.

 

[palerider]

But turboxs had a 3 not a 6....right?

 

[TRSpeed3]

So the race is on to see how has the fastest MS3...

 

[Dream]

So the race is on to see who can blow there car up the fastest...

Fixed that for you (shocked)

 

[TRSpeed3]

Fixed that for you (shocked)

Lulz on a good fix.....

 

[2.0t03speed]

hmmm im interested to see how much the motors gonna be able to hold.

 

[staples187]

TurboXS blew their motor?

Yeah, like Haltech said, it was a while ago. Like I've said before the thing that gets me is every person that blew their motor had the fuel cut defender on their car including TurboXS' project car.

 

[driver311]

Hey guys, Dream says dont run racegas so dont do it. Ill just keep on doing it and going faster than the rest of ya! LOL Race gas is gods gift to those who dont settle for what pump gas has to offer. Ive ran 100s of gallons in the last three cars Ive owned and nothing but good results here. Not to mention the 10s of thousands of evo and srt owners that dump that s*** into their tank everyday and turn the wick up. Those guys must all have bad bearings! (cryhard)

 

[mrlilguy157]

well. i think the only 2 people in the current running for the fastest ms3 is me and palerider ;D

 

[driver311]

We will see about that! Maybe with me piloting his car. LOL

 

[Derek88]

We will see about that! Maybe with me piloting his car. LOL

You and Jon need to come to NC and shut the Caliber guys up... I'll drive someone to the track unless you all want to pile in Randy's car... then I might have him from a roll...(laugh)

 

[palerider]

well. i think the only 2 people in the current running for the fastest ms3 is me and palerider ;D

I cant believe nobody else has jumped on this....just on impulse alone..lol

 

[Haltech]

Hey guys, Dream says dont run racegas so dont do it. Ill just keep on doing it and going faster than the rest of ya! LOL Race gas is gods gift to those who dont settle for what pump gas has to offer. Ive ran 100s of gallons in the last three cars Ive owned and nothing but good results here. Not to mention the 10s of thousands of evo and srt owners that dump that s*** into their tank everyday and turn the wick up. Those guys must all have bad bearings! (cryhard)

Any moron who tells me not to run racegas is obviously someone i dont ever want touching my car. Race gas vs regular fuel isnt any worse for your bearings. What should be stated is running RICH and drenching your rings in fuel is what will cause you problems with the bearings.

Ive run more race gas through my truck than regular fuel. Its been fine for 5 years..

Some things about the import scene are annyoing and one of them is the misconception of information.