How can I connect a breather to a silicone tube?

[Andrade08]

I want to connect a breather to a 45* silicone coupler. Like what is on TurboXS cold air intake kit here:

There must be something out there for taping a breather port in silicone tubing. I have searched for hours already and have come up empty. I really SUCK at web searching.
THANKS.........Matt

 

[driver311]

I want to connect a breather to a 45* silicone coupler. Like what is on TurboXS cold air intake kit here:

There must be something out there for taping a breather port in silicone tubing. I have searched for hours already and have come up empty. I really SUCK at web searching.
THANKS.........Matt

Just drill a hole and thread a nipple on there. Much easier. Or go to a parts store and by a nipple that has longer threads and put a nut on the other side in the rubber elbow. Either way will work.

 

[Andrade08]

Thanks..........I baught some Marine through hull fittings in black nylon 90*.

I kept searching. LOL!!

 

[Andrade08]

A little rubber epoxy and I will be good to go!!!!!!!

 

[bacarl]

Looks like it'll work perfectly! What're you installing a breather on/for?

 

[Andrade08]

It's the stock valve cover breather vent. The one that snaps into the stock 45* angle accordion intake tube. I have the ATP inlet pipe but I want the breather in a different spot than right above the BPV vent.