Fs: Magnaflow Exhaust

[gen1pro]

I'm selling my Magnaflow exhaust. Its for the 06-07 Mazdaspeed 6.
The price is $325 shipped to anywhere in the U.S.

Payment will be through paypal, so PM me I'll give you the info.

PLEASE NOTE: I cut the tips off the mufflers so that they wouldn't burn the bumper. I still have them so they can be welded back on.


Any reasonable offer will be accepted.

 

[chisss]

do you have a pic of the system when it was installed?

 

[gen1pro]

No, unfortunately I didn't take any pictures of it when it was installed.

 

[Killer]

Please post pics of the muffs where you cut off the tips.

 

[ZUZOOM]

Why are you not using them? Looking to have the exhaust replaced with magnaflow. What issues are you having?

 

[chriscecc914]

Why are you not using them? Looking to have the exhaust replaced with magnaflow. What issues are you having?

the tips are known to burn the bumper if they are not aligned perfectly.

 

[gen1pro]

Please post pics of the muffs where you cut off the tips.

You can see the muffler tip in the picture that I have there. You have to extend the end of the muffler to make it fit into the bumper. That extension piece is on there as well. Do you want a closer shot of the muffler?


Thank you "chriscecc914" for answering the other question for me.

 

[Killer]

Do you want a closer shot of the muffler?


.

Please.

 

[gen1pro]

I'll take the pictures in the morning and I should have them up by the afternoon.

 

[Killer]

Thanks...if all looks OK to me you may have a buyer.

 

[Smokey6]

Magnaflow exhaust

It would be interesting to know why you took it off. How long was it on?
Was there anything you didn't like about it?

I may be interested, but would like to see the ends of the mufflers that were cut off. They do not show in the posted pictures.

OK, maybe that's one on the lower muffler. Did you just shorten them to get them away from the bumper?

Thanks,

 

[gen1pro]

O.k. well here are the pictures that you guys requested.

As for the other questions, I took it off because I purchased the Corksport exhaust to replace this one. It was installed March 17, 2007 by a local Meineke muffler shop. They are the ones that cut off the tips for me as well. They basically cut the tips off and then added a little extension piece so that it would still go to the bumper and not end up short. When you looked at it from the back of the car it looked stock.

The only thing I didn't like about the Magnaflow is that it didn't sound mean enough. The exhaust basically sounds stock until you get on the gas. Of course this is a personal preference.

 

[gen1pro]

Heres some more for you guys.

 

[Killer]

Those tips you cut off are designed to fit into the holes in the bumper with the crome rings removed...so instead of removing the rings you cut off the tips?

 

[gen1pro]

Those tips you cut off are designed to fit into the holes in the bumper with the crome rings removed...so instead of removing the rings you cut off the tips?

After reading many post about the bumper beginning to melt from these tips, I decided not to take a chance with my bumper. In my eyes I would rather cut the tips off of the exhaust instead of dealing with a partially melted bumper.

 

[Zixxspeed]

how many miles?

 

[gen1pro]

how many miles?

Approximately 11,250 miles traveled while having the magnaflow exhaust on the car.

 

[gen1pro]

Bump for someone to buy this...PM me an offer, the worst I would say is no.

 

[Killer]

$100

 

[gen1pro]

That would barely cover shipping so I'm going to have to say no.

Try again, I'm somewhat in the holiday spirit so I might let it go for a surprising number (just not $100).