Mazda Protege Owner Photos

[seldomseenmp5]

yeah I run nitrogen dude... hold on a couple mins I have a some one half assed pic... excuse the inside I just got done painting it last week and I have the inside all ripped apart to get painted... and I fell in love with the p5s from the start... lol I had the third one bagged after chassis tech did the two yellow ones in low rider magazine... the sponsored me to put the product out there lol...

thats a good looking p5. my buddy back in va had the same color p5 on bags and that was whatg got me into them. got any pics of the tank set up?

 

[seldomseenmp5]

not the best pic I know.. and like i said the inside is a mess right now... but I went with nitrogen to bypass that loud compressor...

 

[sanblaster]

max sig height is 300 pixels, including all text and pictures... yours won't even fit on a single screen!!!

Seldom I did a half ass sig for you because your sig is huge bro. Modify this or you get the idea. Again nice ride:

 

[seldomseenmp5]

I heard that man... I was getting mad with the body kit dude... I had to build out about half an inch just for it to match up well with the fenders... the back bumper wasnt bad but it still had cracks i had to cut out and refiberglass... in other words its a pain in the a$$... but even the wings west side skirts were pretty much rough... I got p*ssed withem and just primed the heck out of them and painted them... the double sided tape on them wouldnt stick for sh*t so I ended up using windshield urethane on them... theyre permanent LOL

Yeah I will never ever do chrome and fiberglass ever again. The chrome is peeling and my fiberglass is cracking all over the damn place.

 

[seldomseenmp5]

LOL... thanks bro... if you guys have any questions Ill be glad to help you with the best of my ability man... and I appreciate all the luv lol

Seldom I did a half ass sig for you because your sig is huge bro. Modify this or you get the idea. Again nice ride:

 

[sanblaster]

Yeah I'm not the best with sigs but the mods will bust your balls over them so play with it and maybe get some text in there.

 

[seldomseenmp5]

lol Im not the best when it comes to making sigs...

Yeah I'm not the best with sigs but the mods will bust your balls over them so play with it and maybe get some text in there.

 

[seldomseenmp5]

thats a lot better lol

 

[Driver_X]

lol Im not the best when it comes to making sigs...

So if you use nitrogen, how often do you have to refill that tank? Also what did you have to do to make the drop all the way down? Did you get the true airbags, or did you get air struts or air cylinders (shocks). Me myself this is the only way I would lower any car...but it just cost to much and I dont have the space for all the components. Nice ride though. Do you know if the kit that you have would fit a msp?

 

[sanblaster]

Try this mang:

 

[sanblaster]

Driver X, were you ever a member of clubpro. Think I remember your pro. And yes the buddyclub will fit a msp.

 

[seldomseenmp5]

I used Chassis Tech's Air Strut system and got the F.B.S.S. pretty much all it is is a regular coil over type strut but instead of a coil spring theres an airbag... and its a simple install pretty much I cant remember if we had to really use anything besides some nuts and bolts... from what we took off... but all we did was pull out all of the bumpstops and stuff which is fine as long as your not riding aired out on a bumpy road... and yeah the front struts should be the same but I believe the rear is different not to sure but they make the kit all they do is order the struts and weld the bags and all that good stuff in... and I refill the bottle anywhere between once a month to twice a week... depends how much i play with it lol...

So if you use nitrogen, how often do you have to refill that tank? Also what did you have to do to make the drop all the way down? Did you get the true airbags, or did you get air struts or air cylinders (shocks). Me myself this is the only way I would lower any car...but it just cost to much and I dont have the space for all the components. Nice ride though. Do you know if the kit that you have would fit a msp?

 

[seldomseenmp5]

haha thanks man... again lol

Try this mang:

 

[nate0123]

thanks! my browser and scrolly mouse thank you much

 

[sanblaster]

lol

 

[seldomseenmp5]

lol

thanks! my browser and scrolly mouse thank you much

 

[seldomseenmp5]

oh yeah buddy club2 has a kit for the sedan model... mine wouldnt work because the bumper is 4 inches shorter then the sedans... but they def have a kit... www.buddyclub2.com

So if you use nitrogen, how often do you have to refill that tank? Also what did you have to do to make the drop all the way down? Did you get the true airbags, or did you get air struts or air cylinders (shocks). Me myself this is the only way I would lower any car...but it just cost to much and I dont have the space for all the components. Nice ride though. Do you know if the kit that you have would fit a msp?[/quo

 

[seldomseenmp5]

I use to have their Carbon Fiber Front splitter also... but I deceided to get rid of it.. .if I had the msp I wouldve kept it it looked good jsut didnt fit my image in my head...

 

[seldomseenmp5]

like the car man... pretty clean ride

here's mine, 2002, 67,000 miles, by the way there was one on here about age and occupation? 19, custom car audio and performance (certified)(2thumbs)

Fidanza 7lb flywheel
Exedy stage 2 clutch
AWR complete mounts
GC coil-sleeves
Front & Rear strut braces

 

[Driver_X]

Driver X, were you ever a member of clubpro. Think I remember your pro. And yes the buddyclub will fit a msp.

I wasnt talking about the buddy kit, I was just talking about the Airbags... Also yes I was a member of Clubpro. the pro was good...until she started heading down hill. I guess it was giving me a sign saying that I should trade her in....b/c the scoop flew off when I was going to look at the yellow MSP I have now.