WTB: MSP Front Sway Bar Endlink

[Identity_X]

I am looking for the left (driver side) front sway bar endlink for my MSP. If you've upgraded them and want to get rid of your stock ones, PM me and we can work something out. I am looking only for the left one, but might consider the pair as well if price is reasonable. Let me know!

 

[xelderx]

both endlenks should be identical. I have two sitting in my garage although please measure your other side and tell me how long it is. Mazda used 2 different lengths and I want to make sure I have what you need. I'll post up pictures once I know that I have the right one for you.

 

[Identity_X]

I wasn't aware that there are two types of endlinks for the MSP. Is the difference between the 2003 and the 2003.5 models? Anyways, I measured the endlink and it's approximately 11.5" Let me know if that's the one you have! Thanks!

 

[xelderx]

All the MSPs had the same length but I think the 99-00 sedans were shorter. I just want to make sureI have the right one. I'll be running over to the garage after while. I'll try and remember to bring my camera.

 

[Identity_X]

Aren't the endlinks from the 'regular' 01-03 Protege different than the MSP because of the Racing Beat sway bar?

 

[xelderx]

Aren't the endlinks from the 'regular' 01-03 Protege different than the MSP because of the Racing Beat sway bar?

Not that I'm aware of, but I'll check that length for you tonight. I used to have an MSP bar on my car and I'm pretty sure that my stock endlinks worked fine.

 

[TheMAN]

*all* 00+ front sway bar end links are the same regardless of trim... so you can get one from a 01 DX for example and it'll work... same goes for the P5 s***

99 end links are shorter

 

[xelderx]

*all* 00+ front sway bar end links are the same regardless of trim... so you can get one from a 01 DX for example and it'll work... same goes for the P5 s***

99 end links are shorter

Awesome info...I knew there was a shorter one. Mine are definitely the longer ones then. I'll post up pictures later tonight.

 

[Identity_X]

Thanks for the info Edwin. xelder, I'll PM you once you have the pictures up

 

[xelderx]

This is actually a brand new one that I bought and never used. I have two brand new nuts with it as well.

 

[Identity_X]

Check you PM