Torn side motor mount

Spooled

Member
:
Mazdaspeed Protege
Has anyone else torn their passenger-side motor mount? Mine is absolutely toast and I was curious mow much that's going to set me back. Also, does anyone have the official part number for that so there is no confusion when I order it?
 
mine was torn and i got the inserts :) , my front was torn too, replaced that, i have a rear motor mount to put it too jsut havn't had the time to do it. stock motor mounts suck ans should be replaced
 
ZenProtege said:
http://www.awrracing.com/store/product_info.php?products_id=251

awr replacement insert for driver & passenger side

I've been looking at those, but they are just inserts, not replacements. The rubber part is completely torn. I can run my finger around the inside, except for a small part on the very bottom.

I am going to get the full AWR combo setup for all 4 mounts, but I want to replace that side mount first.
 
Same here passenger side and the mount is pretty expensive too ke with Ken protegegarage.com. I could manage to just put the insert because it's only teared on the top but I'm just going to try and find a used one from a junk yard and put the inserts. BTW the msp mount is a reinforced Protege mount.
 
I just ordered all 4 mounts/inserts from Cullen. That will get me by until I can get a hold of a replacement. The inserts should prevent further damage for now.
 
I doubt that. The insterts are solid and wouldn't get anymore abuse than a solid mount would.
 
I have the inserts and helped install same kind of inserts in a mit eclipse that had broken mounts and saw them get damaged and decided to buy me a new mount before installing mine anyway the inserts are cheap.
 
i believe the passanger side will run you around $150 from mazda.
 
Last edited:
Back