SU TP install!!??

[thabigo]

Hey guys,

I am about to install my Street Unit Test Pipe. Any tips or recommendations of how to install it?? What tools am i going to need, has any1 already done a write up.

 

[katsmp3]

eh.. we don't really support SU because they screwed over some members. maybe someone will have done this and can help you but please don't be discouraged with the site if noone has the answer on this on

 

[terbow]

su has a forum on their site i would try there

 

[AWDTerror]

not that hard jack the car up, remove the 4 bolts, drop the cat, replace with pipe and put bolts in and your done.

i would have gone with the turboxs rp myself.

 

[thabigo]

hey quick Q, I was looking under the car and right next to the Cat i noticed two Sub frames... (i guess thats what they are called. But there are two green bolts that go into each one. They are all loose?!?! This is beacause the car is jacked up or arent those suppose to be bolted in tight???

Thanks,

orlando

 

[thabigo]

btw how did Su screw over some memeber??? when did this happen?

 

[trees]

Get a new gasket for the rear of the TP. They dont give you one, they want you to reuse the old one but dont.... go buy one

 

[RevLimitLaunch]

btw how did Su screw over some memeber??? when did this happen?

+1 on that one, i've been dealing with them since the msp was bought first off and haven't heard any problems from them anywhere. m6club supports them. anyway, the install is easy as heck, use some pb blaster or rust type penetrant for good measure. use thread locker on the bolts when you install them as well.

 

[AWDTerror]

I suggest you hold off on posting about that company. They do not anyone wanting to reference that company. It is an unwritten rule. If you are curious enough email one of the mods.

 

[Killer]

Done.