SSAFC tuning help PLEASE

[mxjosh82]

Alright guys I have an SSAFC 2 with datalogging and an aem uego 2. I am running the 9psi supermap in the SSAFC library thread. Now here is my problem, looking at the wideband while at WOT the numbers look safe (high 10's-low 11's) I know this isnt ideal for the most power, but it is my DD and I'm not trying to blow it. Now after doing some data logs, every psi under about 4500 rpms says its just insanely rich..I'm talkin 12-high 13's. Ive seen a few even in the 14's and one at 16!!! Now the motor should have blew if this was the case, But my wideband gauge itself is telling me it is ok, the SSAFC datalog is telling my Im going to blow it.....anyone else have this problem? Above that it the SSAFC says I'm good and the numbers are in the 11's. Any help is appreciated. Thanks guys!

 

[Spiced MSP]

maybe you didn't set the AUX setting correctly in the afc for the wideband. They should be the same on the gauge and in the afc. By the way, the higher the number, the leaner the mixture, not rich

 

[mxjosh82]

Sorry leaner is what I meant. Hence saying "it should have blown if those were my actual numbers." ...at idle the controller and wideband are the same, and I could have swore my settings were correct but ill double check them. Hitting 16 AFR at like 7psi at 4000 should have made it go boom