Need some opinons on how to get ahold of a MFactory LSD any info will be appriciated.

[MSP_2003.5]

Here is the scoop on my ride, I have a 2003.5 Titanium Gray protege that needs a new lsd in it. Was going to go with the stock replacement welded but I don't want this happening again so I have chose to go with the MFactory LSD by what I have heard about them. So my question is how do I get my hands on one at a fair price and what will I need for it to install it on my car. Thanks for any help you can throw my way.

 

[hornsfan10609]

crossover auto sells them with everything you need and are a good reputable company. Speed Circuit I believe sells them as well.

 

[MSP_2003.5]

So will this replace the whole old lsd or will I need something off my old one like the big gear with teeth on the end. Sorry for being a noob on this just want to make sure I get this right the first time and thank you for replying.

 

[808MP5]

ken at protegegarage can get them too

and here's some things you might wanna get also
Primary Shaft Lock Nut
F520-17-628
QTY=1

Secondary Shaft Lock Nut
[strike]F521-17-628A[/strike]
NEW PART NUMBER: G501-17-629A
QTY=1

Carrier Bearings
G5R0-27-350B
QTY=2

axle seals
F003-27-238B
QTY=2

as for the large gear you will have to drill out the rivets from the stock lsd... then bolt it back up to the mfactory

 

[MSP_2003.5]

Thank you this helps a ton I'm assuming any transmission shop can get that off for me if I ask?

 

[808MP5]

Not sure but i wouldnt doubt it. Haven't installed mine yet. You do need a machine shop to press on the carrier bearings if you don't have a press.

Do an advanced search here on the forums and select title only "mfactory"

 

[MSP_2003.5]

Will those bearings some in the new kit i purchase or do i have to use the old ones

 

[MSP_2003.5]

Lol nvm on last question.