HellaFlush On MS6????

[zinger002]

oh noes. my 18x9 +35's are only 5mm more inset.

i cant wait and only 19 lbs a wheel

 

[GSM6]

So there's like 4 people in this thread that are going to go flush? Where's all the pics?

 

[SHURIK]

18x9 +30 offset not my car.. Im getting 18x8.5 +35 to +40 offset

i just jizzed my pants. thats the exact setup i want....i hate you

 

[zinger002]

im not really going for flush.

its just the only size i wanted that would for sure fit perfect on the next car i would buy if anything physically happened to where i had to let go of the speed6.

 

[Qwik6]

So your buying wheels for your next car? lol

That red one looks nice. Could be a little lower and less camber.

 

[batou079]

That red one looks nice. Could be a little lower and less camber.

and a little less poke. lol

btw, nice new sig qwik, i like it!

 

[KrGsMrNKusinagi]

I need new tires soon well by christmas probably.. So might as well get some wheels.. Im definitely gonna go 18x8.5 probably the Enkei RPF1s with 40mm offset or the 30mm offset.. Since Im not gonna lower my car more than 1-1.25 inches its gonna be fine I hope ???? IF I find some Bronze ones I like with the proper offset and size I want then I will get them instead.. Even looked at the 5-zigen Pro RACER GN+

 

[Qwik6]

I really want some volk te37. But way too pricey.

Thanks batou079

More pics of that red one already!

 

[zinger002]

i bought the rims based on th range of cars thy will fit fine on even if prefect figment is a little off on my car thats fine.

cant wait to se what the op finally gets done.

 

[KrGsMrNKusinagi]

I really want some volk te37. But way too pricey.

Thanks batou079

More pics of that red one already!

Heres one with 18x9 with 45 ET
Front Fenders Rolled, Rear Fender Lip Shaved - No Rubbing

Not my car...

ANother one 18x9 +30 Rota G force

Heres the thread link

http://mazdamp3.com/forum/showthread.php?123717922-Mazda-6-with-18x9-30mm-offset-wheels

 

[justanothermp5]

lol at the first pic, and u put "not rubbing"
of course its not rubbing, look at the massive gap between the tires!

 

[GSM6]

I like to rub one off every now and then. Wait what?

 

[vrspeedemon]

lol at the first pic, and u put "not rubbing"
of course its not rubbing, look at the massive gap between the tires!

keep in mind that on the speed6 a lot of the clearance issues and rubbing problems are a result of not enough inner clearance to the suspension components.....and not necessarily the tire gap.

 

[GSM6]

keep in mind that on the speed6 a lot of the clearance issues and rubbing problems are a result of not enough inner clearance to the suspension components.....and not necessarily the tire gap.

Inner clearance in the front or rear? If in the rear, my set up is 26mm closer to the suspension components than the 18x9 +30 with I'm assuming a 225/40(cant read the rear tire sidewall)? My fronts (w/ no spacer) have identical backspacing.

 

[:: Gusto ::]

thats nice.. but what kind of suspension is every1 running foR their hella.flush look??

 

[RhoadBlock]

Realized I never answered anyone here. Mine are Privat Reserve 19x9.5 +25 Way lower offset than I was planning but I couldn't pass up the price for them. These will do until I save up for a legit set of Works or something. Anyway, tires came in over the weekend but I was out of town. Getting them mounted tmw. 225/35/19 Nankang NS-IIs on 19x9.5. Hella poke but wait till I get the fender work done before you judge me lol. I'll post pics once they're on the car tomorrow after work.

As for suspension, I'm running BC Coilovers. I've got the rears maxed out but I may try something to get them lower. I'll see after the test fit. But my rear diff is pretty damn low to the pavement lol. Low enough that I can't get my jack under it. And my CP-E mid pipe muffler is mangled up a bit.

 

[USAFVMI08]

OEM RX8 wheels and stock suspension for me. "Flush" look with no bottoming out/rubbing.

Love it

 

[monstersix]

here is my setup, i got 18x8s im not sure what backspace, and im not lowered yet

 

[RhoadBlock]

Teaser pics for proof. Lowered the front about another 3/4". Sitting perfect. Just gotta add a touch of camber to the rears and I should be perfect. Here's my phone teasers on my way out the door for work this morning. Better pics once it warms up Friday and I can wash the car.

Front before lowering

Rear

 

[Qwik6]

I gotta say I am not a huge fan of the idea of stretching tires like that. But block that looks bad ass!!! (2thumbs) Are they the same size wheel/tire combo front and rear? The rear looks wider to me for some reason.