Exhaust hangers

[icantshift]

So I need some new exhaust hangers, my MR catback if flopping around and rattling during hard driving and sometimes bumps. I know corksport used to make hangers specifically for the protege's but they took them off their site. Do the speed3 hangers or other corksport ones fit? Also if there is other options I haven't found let me know, thanks

 

[Ward83]

Are you talking about the rubber pieces? If so, any muffler shop should be able to replace them, they usually have lots of different size ones in stock. If you'd rather do it yourself, I would try something like this:

http://www.summitracing.com/parts/hok-41163hkr/overview/

 

[icantshift]

Are you talking about the rubber pieces? If so, any muffler shop should be able to replace them, they usually have lots of different size ones in stock. If you'd rather do it yourself, I would try something like this:

http://www.summitracing.com/parts/hok-41163hkr/overview/

Well yeah, but I don't need to replace them, I need to upgrade to some stiffer, high performance purposed ones to keep my exhaust in place. Corksport's urethane ones would be perfect if they still made them for protege's. (pissed)

From corksport's product page for the speed3 hangers:

Combining a new exhaust system with the stock rubber exhaust hanger allows for movement under normal driving conditions and can cause a thumping of the exhaust touching the underside of your car when going over bumps or navigating potholes...Installing the CorkSport exhaust hangers will limit the excessive movement of your performance exhaust and keep you system tightly in place.

 

[Ward83]

You should be able to find some universal poly ones that will fit. They aren't exactly precision fit parts, so as long as they're pretty close to the OEM length they will work. Measure the hanger rod diameter, and the distance between the holes on the mounts, and then look for some that will fit. One of these would probably be a good candidate, if the rod will fit through the holes:

https://www.amazon.com (commissions earned)

https://www.amazon.com (commissions earned)

 

[bikingpro5]

CS hangers are 10mm and 12mm, you could use universal poly ones, many proteges are rocking these as well and you can still buy them.

http://www.torquesolution.com/Exhaust-Mount-s/1239.htm

 

[icantshift]

CS hangers are 10mm and 12mm, you could use universal poly ones, many proteges are rocking these as well and you can still buy them.

http://www.torquesolution.com/Exhaust-Mount-s/1239.htm

Well they aren't blue, but they'll work. Thanks!