Corksport Radiator/Fan Problem ~ Please Help!!

[dave45090]

Fits like a champ. I'm using two Spal pusher fans (in front as discussed). However, the fan on the driver side is only 9".

Works great....no fitment problems. I'll post up some pictures when I get a chance.

Any update? Did you get it to work with the SPAL fans?

 

[Metallic36]

Sounds great.. do you think by using the fans in this location that it adds to the cooling of your temperatures more than having them in the engine bay?

Scientifically speaking (kinda..) if you have pusher fan on the outside of the A/C condensor and radiator, wouldn't you be "pushing" cooler, fresher air into your condensor/radiator, rather than if you had puller fans "pulling" the air from your hot engine bay ->>> to the condensor/radiator? New concept here, may try it myself. To me, it seems better to be bringing cooler air in instead of using that hot stuff in the engine bay.

 

[Metallic36]

Any ideas on my above-posted theory?

 

[808MP5]

i think it would probably work better inside of the engine bay as pullers cuz when the inside fan turns on i can feel lots of heat being blown around... i have a 12" spal on the outside passenger side pushing and can't feel barely any air getting through... luckily i could still fit the stock driver side fan,,

pull = pulling air in from outside
push = pushing air in from outside

you guys and your shiny radiators imma get one eventually

 

[axisboldaslove]

what are the advatages of a dual pusher setup?

 

[dave45090]

Sounds great.. do you think by using the fans in this location that it adds to the cooling of your temperatures more than having them in the engine bay?

Scientifically speaking (kinda..) if you have pusher fan on the outside of the A/C condensor and radiator, wouldn't you be "pushing" cooler, fresher air into your condensor/radiator, rather than if you had puller fans "pulling" the air from your hot engine bay ->>> to the condensor/radiator? New concept here, may try it myself. To me, it seems better to be bringing cooler air in instead of using that hot stuff in the engine bay.

It has been cold here since I installed it.....well cold for Tennessee anyway. It has been in the 20s and 30s mostly so I don't have a good feel for how it will work.

 

[Metallic36]

I'm curious to see how it turns out during the summer time.. I'm thinking about putting a pusher on the outside of the a/c condenser then a puller on the radiator. That would probably allow me to put a 14" on the outside, and 14" on the inside.. but I'm also wondering about how many volts will be required to run those two. I don't want it to wear my car down trying to pull the power. If anything, maybe two 12" fans.