bc coilover with camber plates owner please help!?

[udontknowjack]

need picture of the camber plates...how much did you cut/trim off....picture from the top please...thank you...

 

[Listers]

i think it calls for a 3in holesaw...

pic in this thread http://www.mazdas247.com/forum/showthread.php?t=123699803&highlight=coilovers

 

[udontknowjack]

i think it calls for a 3in holesaw...

o i know what it calls for...i want to see pictures of the finish install...

 

[Listers]

pics in thread provided

 

[thanotosq]

Sorry it took me so long, but here they are!

 

[udontknowjack]

Sorry it took me so long, but here they are!

thank you....did u get all the under braces in as well?

 

[thanotosq]

thank you....did u get all the under braces in as well?

under braces?

 

[udontknowjack]

didnt u get all the gt spec under bracing? or did i get the wrong guy?

 

[jp4130]

Sorry it took me so long, but here they are!

Very nice, how much camber can be acheived with those upper mounts?

 

[thanotosq]

Very nice, how much camber can be acheived with those upper mounts?

honestly, i havent really messed with it too much yet, but after i get up to st. louis i had planned on tweaking a bunch....

I'll definitely let you know...


And i think you got the wrong guy, but i wish that you hadnt!! All that GT spec stuff is next by all means!(nana)

 

[jp4130]

Do you rememeber what your camber when you got you alignment post insatall? It looks about in the middle in the pics probably about the same as factory.(attn) Max out that negative camber. Bracing would compliment all your other handling mods nicely.(drive2)

 

[udontknowjack]

Do you rememeber what your camber when you got you alignment post insatall? It looks about in the middle in the pics probably about the same as factory.(attn) Max out that negative camber. Bracing would compliment all your other handling mods nicely.(drive2)

thats what im gonna do...but my boy is little lazy at the moment....hes gonna install those bc racing coilover/autoexe front/rear lower tie down/gt spec 4 point ladder brace for me on the side.....im hoping to set -2.3 front for track day/autox -1 rear.....-1.5 front for dd

 

[ericrapp]

Sorry it took me so long, but here they are!

Thanks for pictures!

 

[jp4130]

thats what im gonna do...but my boy is little lazy at the moment....hes gonna install those bc racing coilover/autoexe front/rear lower tie down/gt spec 4 point ladder brace for me on the side.....im hoping to set -2.3 front for track day/autox -1 rear.....-1.5 front for dd

That sounds good, maybe even a little more front camber for your track setting. I'm sitting at about -2.1 with my stock upper mounts, I would definitely like to get closer to -3.

I can't wait to hear how your car performs with all of those chassis reinforcements, should really compliment your coilovers.

 

[udontknowjack]

waiting for my shop buddy to install those for me on the side is a drag

 

[jp4130]

Do it yourself.

 

[udontknowjack]

not good with a wrench like most of guys on the forum....never really a diy kinda guy....specially i race ball out on this car at the track....if i screw or miss something....boom...wait....outta here...(shocked)

 

[jp4130]

Oh I see, thats cool your buddy does your work for you.

 

[GhostMercury]

I have 1.5 camber up front with my cobb springs and it handles pretty freakin awesome at the autox. I will be getting the BC coilovers from Importimageonline durring the winter, pretty much just for camber adjustment lol. But having height and shock adjustment will be nice also.

 

[jp4130]

I have 1.5 camber up front with my cobb springs and it handles pretty freakin awesome at the autox. I will be getting the BC coilovers from Importimageonline durring the winter, pretty much just for camber adjustment lol. But having height and shock adjustment will be nice also.

How much camber are you hoping run in the front?