2003.5 Custom Fog Light Kit

Status
Not open for further replies.
hazeXban said:
Quick question... What is best way to feed wires through the firewall? Just make a lil slit in that rubber compound and tape like a paper clip to the wires and push it through? And what do you use to seal it back up? I think that is my only question. Thanks. I plan on doing this on Sat morning
Follow the yellow amp wire through the firewall. Tape some wire to a coat hanger and feed it next to that.
 
So u mean feed the wire from inside the car into the engine area instead of the otherway around?
 
zmzmp5 said:
1.jpg

2.jpg

3.jpg

4.jpg
wow that looks niice and clean..

which lamps are those??
 
Newf said:
curious, what size are the stock p5 lights? I can't remember if there 5, or 5.25 or what?
P5, eh? I asked the dealer if they could put P5 fogs on mine. They were all to happy to do it but then came over later on while I was waiting for my ECU flash and said they're too big. I doubt very much that they will fit on our bumper.

I'm looking for as much of a stock look as possible....no blue tint....no blinding white light....no halo rings. There must be a foglight out there that fits this criteria and works with the amazing and wonderful G3 bracket. :D
It will be mine, oh yess it will.
 
only reason why I asked that question is that I wanted to know of those lights above were actually smaller, or larger. The p5 ones are borderline too big imho as it is.
 
Crock said:
I'm looking for as much of a stock look as possible....no blue tint....no blinding white light....no halo rings. There must be a foglight out there that fits this criteria and works with the amazing and wonderful G3 bracket. :D
It will be mine, oh yess it will.
exactly what i'm looking for!
i have arround $200 set aside waiting for a moment when a set of "normal" foglight comes out that fits G3.
 
Guys, I like the white light from the lights, it gives you awesome views of the road. As far as the halo's, turn the muthas off. Thats what the switch is for. You don't have to have them on. Just my .02. (usa)
 
kevducridr said:
Guys, I like the white light from the lights, it gives you awesome views of the road. As far as the halo's, turn the muthas off. Thats what the switch is for. You don't have to have them on. Just my .02. (usa)
Hey everybody!

So, this weekend (hopefully the G3's will be here today), I am putting on the NV-607's. They are a 4.25" driving light (looks perfect to me in size, bigger than 602W, and smaller by 3/4" to 1" than the PL-362W's). They do have halo, but what that is really is two small bulbs inside the housing that can be covered with blue, red, or green rubber condom covers. I have taken them off to give the true BMW angel eyes look (natural halogen light color). Now again, you can have these off without it looking like the feature is even there. I am going to utilize my standard SPST switch setup that came with my 602w's, and going to tap the parking lights for the angel eyes. Yeah yeah, I'll have pictures up when I get them done. The G3 brackets will work awesome with these lights.

I think the NV-607's will be extremely popular with the crowd as the PL-562w's were.

I'll update everyone accordingly.

- Brian
 
Newf said:
only reason why I asked that question is that I wanted to know of those lights above were actually smaller, or larger. The p5 ones are borderline too big imho as it is.
Smaller in depth, but about equal in face height.
 
Status
Not open for further replies.
Back