wheels

Hi everyone, As you may all know, I own a 2016 CX-9 equipped with the factory 20-inch wheels. I’m considering installing the 21-inch wheels from the CX-70 and wanted to confirm compatibility. From what I understand, both vehicles share the same 5x114.3 bolt pattern, but I’m unsure about other...

Hello All. I'm new to the forum, and have been trying to find out the weight of the 20" wheels on my '25 CX-50. Does anyone have that info? If so, please share and Thanks Very Much!

2019 CX-3 Touring with 18" wheels, planning on switching to the Falken Wildpeak A/T Trail. I know I can put the 225/55R18 on - folks here have done it, and folks on the FB group have done it. That'd increase my overall tire diameter about 1.2"/4.5% - over the 3% generally considered "safe"...

SOLD: 16 steel winter wheels with Blizzak tires ($300) For Sale Set of four Bridgestone Blizzak WS80 studless winter tires mounted on 16 steel wheels. $40 Storage bags included. Wheels/tires were purchased in 2014 for my old 05 Mz3. Sadly the brakes on my new car are too large to take a 16...

Hey all, my 2016 CX9 has 44k on the ODO and was bought by me with 32K as a Mazda certified used from dealer a little over a year ago. At that time the wheels were sort of mottled silver/gray/black and i thought they looked better than the painted silver wheels so i considered it a win. This...

Hello, Does anyone know of any speedometer calibration kit for 2019 cx5? Im planning to get an overall bigger tire and wheel which exceeds 3% threshold (generally agreed) and will definitely mess up the speedometer. I googled around for quite some time but couldn't find any kit that will allow...

***** SOLD ***** Wheels/ Snow Winter Tires were used on a 2007 Mazda 3 purchased through tire rack Includes: Four 205/55/R16 General Altimax Arctic Snow Tires - Lots of tread left Four Sport Edition F7 Alloys, 16x7, included hardware - Sport Edition center caps , centering rings , and 20...

I am looking to get rims for the tires I just purchased anyone have and good recommendations, also will these have any rubbing issues. I noticed a few people run them on this site Thanks

Selling the stock wheels from my 07 Mazdaspeed3, since they're taking up more space than I can give them now. Wheels all in very good condition, with TPMS sensors, balanced and ready to mount. There is a very minor chip on two wheels, and minor rash on two as well. (have original lug nuts...

Any suggestions on the best source for a set of take-off/gently used 17" OEM CX-5 Gen2 wheels? I'm planning ahead for winter with the '18 GT AWD I just got for my family's additional car/driver. I have some OEM 16"s (cheaper and unique OEM finish color when shipped from England!) mounted with...

Sold Full set of Rota Subzero wheels and BFGoodrich tires: $250 local pick up. May consider shipping, please PM with ZIP code. 2 of wheels have pothole damage on the lip and inner rim (see pics). 1 wheel has road rash. Damage is repairable and you should repair before installing...

These are spare rims for the blaze yellow MSP I sold here. The buyer didn't take them so they've been sitting in the corner of my studio since I took them off 13 years ago. $800 OBO 17 x 7, +55mm offset, 114.3x5 BP. One rim is a Mazda warranty replacement, very low miles, another is a...

Hello, I'm looking for some CX-5 GT rims with or without tires (2017-2018). Thank you, Nicolas

I'm considering to get the 20 inch wheel of cx9 2018 and install it on my cx5 with 255/45 R20 (+1% of the stock's diameter) tire since I feel they look better on CX5. And also thinking about the handling aspect, the cx5 signature turbo would handle better with slightly wider tire. Mazda gave the...

Does anyone have pics they can post of both the 2019 CX-5 GTR and the Signature wheels so I can see the difference in color? Also, what are the wheel specs? 19x7? offset 46? weight? Tire Toyo A36? I believe this is the signature

Selling like new Cosmis MRII wheels in bronze. They were mounted once to test fitment and decided to keep stock wheels. My loss is your gain. TPMS and centercaps included. Price: $1,100.00 OBO Tires have been weighed and balanced. There is minor scuffing around lug wells but other than...

So I went to have a routine rotation done and discovered two of my rims are bent and the accompanying tires have lovely sidewall bulges nearby on the inward facing wall. Both were on the right side and the wife is pretty sure it was when she nailed a pothole while driving near the Atlanta...

I pulled these off of my 2002.5 Mazda Protege ES, which I am returning to stock and selling. These are 15 mm spacers (I needed them to clear my StopTech ST40 BBK, also for sale). These have been powder coated red. These still cost $120 new. H&R part number is: 30656710 I am selling them for...

Pulled these off of my Protege (which I am returning to stock and selling). Originally bought these to fit over my StopTech St40 BBK (they do, with spacers). Two of the four wheels are in good condition with only one small curb rash on each. One wheel is in very good condition with no curb...

Hoping someone can help... I have a 2007 Cx-9 with about 170k miles on it. About 5k miles ago I noticed a creaking sound almost like a bad mattress coming from the driver's wheel hub when making a sharp right at low speeds under 5mph (weight shifting to the left side). I ignored this until...