suspension

I'm looking to lower my 07 Mazda 3, does anyone know the lowest I can go without compromising anything?

I have a rear 22 mm Progress Sway Bar that I am planning to install tomorrow with some new stuts and endlinks. Anyways I was reading somewhere that it is necessary to have some sort of mounting bracket between the sway bar and the end link? Is this true, because when I look under the car it...

So I got a set of tokico blues come in today and took a look at them. I noticed that there are two shorter ones and two longer ones. None of them were designated to any sides. So im guessing probably the long ones go up front and the short ones go in the back? Or the other way around?

So I have a progress anti roll bar coming in and wanted to switch out all four endlinks too. Anyways my question is when I looked on RockAuto Parts they had endlinks for the rear that were different lengths. It said w/ race suspension length 8.5" mevotech or they had a deeza pair that were for...

Over the last week the front of my car has been creaking loudly when the car falls onto the suspension (speed bumps, rapid changes in road grade, etc.). My mechanic is away for two weeks so I want to hear what you think this might be before I take it to a local random mechanic (I don't have...

If anyone has one of the above, please let me know!

Hey guys, Im looking for some eibach sedan prokit springs. So just let me know what is ur price and how many miles they got. Thanks!

Hello all - new to the forum and just purchased an 08 Mazda5 Sport(Silver) and enjoy the stock look but would possibly like to do a summer wheel/tire combo maybe 18"s and do a subtle suspension drop - maybe just an inch. I just want to enhance the look and not make it look trashy. Any thoughts...

Anyone in Huntsville or North Alabama know where to get my 2007 Mazda 6 lowered for a good deal? I thought about doing it myself but seems like a lot more could go wrong than right. Looking for about a 1-1.5 inch drop Thanks :)

alright so here is the deal. i am new to this forum and just got my ms3 anout two months ago. i have a couple questions that need to be cleared up before i start my mods. i am currently at stock everything but i do have cold air and stealth back exhaust. the dilemna is my rims and spring set up...

Hey guys so i decided that im going to go ahead and switch out my suspension a bit since its been getting very squeaky in the mornings and I got a new job. Anyways I decided to go ahead and get the KYB GR-2 strut replacements on all four. But I also am thinking of switching out my springs as...

Hey everyone, I have been hearing loud popping noises and rattles when hitting almost any size bump in my '01 protege. I had a feeling it had to do with the left rear strut or its top mount. When i checked, I noticed the strut has sort of exploded out and extended a couple of inches, and it...

I have a clunking noise that is only intensifying in frequency and severity. It is coming from just right of center on the front end between the tires. I have replaced the strut, strut mount, tie rod end, sway bar links, and lower control arm with bushings and ball joints pre-installed. This...

I'm selling this AWR Sway Bar Bracket For 19 & 21.5mm MP3 Bars. I was using it with a RacingBeat sway bar for a while but I've since upgraded to the AXR bracket. These brackets will include the bolts but not the horseshoe brackets and bushings. Price is $15 shipped. Thanks for...

Want your Mazda to handle like a track car? Add the new CorkSport Mazda 3/Mazdaspeed 3 Rear End Links to your suspension set-up to get the most from your rear sway bar. By dialing in your turn-in speed and stability you are able to make your end links a tunable component of your ride! The...

Hey, I recently bought a racingbeat strut bar but the seller did not have the brackets. My car has cruise control and I read somewhere that I would need some special brackets to make everything fit. Where could I find those brackets? Are they necessary? For the installation, will it be...

Having my BC coilovers installed on my 05 mazda 3 hatch in two days, Sitting on after market 17's (plan on switching to 19's in near future). I want it to sit pretty low but not too low, so how should I have the coilovers adjusted? I'd like about about maybe 1.5" space between top of wheel and...

Hey there, I have been looking into getting a new suspension kit because my factory shocks are starting to leak. I looked at the tokico blue with the MSP springs from racingbeat that gives me a ~0.75" drop all around. But for the same price, shipping to canada included, I found this kit that...

Hi, Would someone confirm what size of polyurethane bushings I could use on my Mazda 5? Getting lots of knocking-in front-even after replacing-shocks, sway bar links, motor mounts, left CV shaft, lower control arm. Or, would it be more efficient to just replace the whole Stabilizer bar? (not...

wtb awr motor mounts as mine are chewed up, 2003 mp5. also looking to improve handling with some springs and shocks, something like tokico and tien s techs. lmk at donrafa7@gmail.com as i'm not on this site all the time. located in socal upland / lake elsinore area