WTB: MSP Windage Trap ASAP....

[VisualValues]

I am ready to do the swap and I need a MSP windage tray. I bought one several months back and never looked at it to realize that it wasn't the MSP tray. It was just the standard tray.

I need one ASAP... willing to pay for overnight shippment......

Please PM me with price.... I can paypal you immediately if you have one.

Shipping to Aberdeen, MD 21001.....

 

[VisualValues]

Bump ..... I know someone has one of these.... Willing to pay $150 Shipped overnight...

 

[Dpwhitehead1]

dont you have a msp??

 

[Bigway]

just find a good welder who does aluminun and have them drill a hole in it. Not really the hard i did that when i broke my mine.

 

[ogsp5]

I will have a modified one in about 3 days. Like what Bigway posted. It will be approx $155 plus shipping.

 

[MSPLIFE]

MSP windage tray: what part is this?

 

[jr_1086]

im pretty sure its the tray between the oil pan and the block thats where the oil return line goes in

 

[MSPLIFE]

^thanks for the leson

 

[dstmsp03]

wow.. only 150 to buy one.. id never sell one for that.. i paid 319 for mine!

 

[VisualValues]

I have an MSP but the engine sale fell through on the MSP engine. I bought a non MSP engine. The tray on the MSP is broken from when the motor blew... so now I need a tray.

I found a local shop that will do the work for me tomorrow so I'm going to just take it there unless someone has one they can overnight.

 

[VisualValues]

I will have a modified one in about 3 days. Like what Bigway posted. It will be approx $155 plus shipping.

I'd pay $200 shipped if you can overnight it for that price but you'd have to send it out tonight.

The shop that is doing the work said they can do it for me tomorrow. They are a very reputable VW shop near my house. They have some crazy VW's and Audi's that they have done.

 

[Bigway]

Hey if you still need one i found the one i had done awhile back.I will do 155.00 plus shipping.just let me know

 

[VisualValues]

Bigway, thanks for the offer, but I already dropped the parts off to the shop last night before they closed.

 

[Bigway]

That's cool this thread gave me a reaason to clean my garage. And I found alot of things i need to post for sale. so thanks

 

[VisualValues]

the shop is going to weld a fitting in my tray today. They asked me to find out if there is room to put a 45 Degree fitting in there? Does anyone know if I there is room, or do you have to use a 90 Degree fitting?

They said they prefer to do the 45 because there is less restriction of flow.

 

[Dpwhitehead1]

should work just fine.

 

[VisualValues]

should work just fine.

Thanks, I called the shop and they are putting in the 45 Degree fitting. The shop is NGP.

If you have any friends with VW's or Audi's they shoudl check this shop out. It's not hard to find, but off the beaten path. They have some sweet cars there and everything I've ever heard about them is great. They will work on all types of cars, but they really know their German cars.

 

[VisualValues]

Thank you for all who contacted me regarding the windgae tray. I got a call from the shop that was doing the work. They called me and rather than needing to buy fittings and aftermarket hoses, they cut the fitting off my old broken windage tray and welded the factory fitting onto the stock non-turbo windage tray. They presure tested it and it looks great. I can now use all my original turbo components from my previous MSP setup. If anyone is local in MD and they ever need this work done the shop is great. They took me through their shop and showed me their Dyno and earged me to let mazda owners know that they would love to work with owners.

As previously stated they are a very reputable VW shop. The shop is New German Performance, (NGP). They are in Perryman, MD in Harford County. The owners have an impresive collection of VWs including a 600hp Jetta.

For others who are interested in custom turbo installs they said they usually tap the block for the oil return and offered to do this for me if I brought the car to their shop. Feel free to PM me if you are interested in learning more about NGP.

If anyone is interested in pictures of the work they did just let me know.