What have you done to your P5 today?

[azuelke]

Header and new hardware

 

[ProjectBlack]

Header and new hardware

X2. You eliminate so much unnecessary crap when you just put a header on. OBX has worked great for me so far.

 

[ProjectBlack]

Removed my mud flaps. They just weren't working out for me. Even though they are functional here in Colorado, they had to go.

 

[bazooka joe]

found out where my leak is coming from. should I just replace the gasket between the two pipes and put on new hardware, or get an obx header since that portion of the jpipe is looking very tired

header....new mid pipe and rb exhaust

 

[azuelke]

header....new mid pipe and rb exhaust

Mid-pipe doesn't look bad, but I can't deny a new one would be bad ass

 

[reut1]

it would be a new magnaflow catted midpipe if i replace it. gonna do just the header first though and see where it all stands. something is rattling with the midpipe and its not the heatshield around the cat, it something within.


question with the obx header, do you still put both O2 sensors into it since there is the one above the upper cat and one right below it?

 

[bikingpro5]

it would be a new magnaflow catted midpipe if i replace it. gonna do just the header first though and see where it all stands. something is rattling with the midpipe and its not the heatshield around the cat, it something within.


question with the obx header, do you still put both O2 sensors into it since there is the one above the upper cat and one right below it?

2 O2 sensors lower one has the non fouler done to it

 

[ProjectBlack]

Also x2 on the non fouler trick. Mine has worked perfectly ever since, and the light turned itself off too!

 

[JDM_Pro5]

Carolina Mazdas meet March 17th, 2012.
There with Civickilla03 (Kevin), Justanothermp5 (Simon), SCMP3 (Mike), bthai (Billy), and many more.
That's Simon on the right taking "real" photos vs this crappy cellphone panorama

Picked up Megan Racing Springs and Monroe struts from bthai

 

[RicoP5]

I need whatever bolt/bracket goes on here on the side that tightens the ac/powesteering belt somehow that come loose and i lost it :/

anyone got a one lmk! thanks

 

[323]

Carolina Mazdas meet March 17th, 2012.
There with Civickilla03 (Kevin), Justanothermp5 (Simon), SCMP3 (Mike), bthai (Billy), and many more.
That's Simon on the right taking "real" photos vs this crappy cellphone panorama

Picked up Megan Racing Springs and Monroe struts from bthai

u only picked up the fronts?

 

[BRIAN_MP5T]

Today I should get the following parts..

FMIC
Hard Pipes
Down Pipe
Exhaust System
Drive shaft
505 Intake Manifold

 

[OGLaughtzalotzz]

went to replace my rear brakes and it turned out they're seized...also bought a set of MSP Rims

 

[JDM_Pro5]

u only picked up the fronts?

they are sitting on top of the bottoms. Apparently the front struts are blown and the rears are good. My front struts are fine and I think my rears are leaking but I'm not sure how bad. I will see about the possibility of mixing shocks...at least until I can buy new ones all around.

 

[ProjectBlack]

How do I know if my P5 is a 2003.5 or just a 2003??

 

[Neps_02Pro5]

Add a 1/2 a quart of oil

 

[323]

they are sitting on top of the bottoms. Apparently the front struts are blown and the rears are good. My front struts are fine and I think my rears are leaking but I'm not sure how bad. I will see about the possibility of mixing shocks...at least until I can buy new ones all around.

u can mix them. my struts in the front are new tokico hp's. my rears are oem tokicos. im glad i replaced the fronts because it rides so much better

 

[BRIAN_MP5T]

How do I know if my P5 is a 2003.5 or just a 2003??

Date of Manufacture on the sticker in the door jam..

 

[THE Phen]

How do I know if my P5 is a 2003.5 or just a 2003??

Does it have a roof rack? If no roof rack, and just the delete strips, then it's an 03.5.

 

[BRIAN_MP5T]