water and alternator pulley

[mazda32008]

i will be changing my water and alternator pulley soon and putting a rear anti roll bar on stock suspension...i don't know if that is a good idea though. Will i have any problems with changing those 2 pulleys? or with putting a anti roll bar on stock suspension?

 

[cmedrive]

Nope. Go for it, take pics, and enjoy, lol.
I've got the Alt pulley i'll probably put on tomorrow and I've had the MS rear sway bar on for months now. Enjoy!

 

[mazda32008]

never mind stock suspension im mazdaspeed springs and lowering it. Only prob is im rolling on steelies.

 

[hinman403]

I changed my water pump pully/ alternator pulley and crank pully. Is totally not a bad idea, you willl notice a gain in the low-mid range. Be carefuly with the belt re-install, because I use change my crank pully as well, I have to change my belt to a longer one. Otherwise the belt will be too short and will put too much tension on the tensioner. I am not sure without the crank pully.

 

[mazda32008]

well i won't be doing this my self so when i get my springs in i will prob take it to my mechanic to install everything all at once, only thing is i am scared about the pulley thing. I don't want the timing to be ****** so when you change the pulleys does the crankshaft pulley get touched? What is sparkboost system...are you spraying?

 

[Akaveli]

I changed my water pump pully/ alternator pulley and crank pully. Is totally not a bad idea, you willl notice a gain in the low-mid range. Be carefuly with the belt re-install, because I use change my crank pully as well, I have to change my belt to a longer one. Otherwise the belt will be too short and will put too much tension on the tensioner. I am not sure without the crank pully.

Any pictures??

 

[DS motorsports]

Did you ever get those pulleys installed?