Want To Turbo

[mp3-79bronco]

well i want to turbo my mp3 and would like to know all the parts i will have to buy b/c im going to buy them individually when i find deals....

i know i need

turbo
manifold
msp ecu
piping
intercooler

and i know theres more....im only going for a little better than stock setup...
wanna run 6-10 psi b/c my engines stock and has 102k

also i found this on ebay..Is this junk or not?

http://cgi.ebay.com/ebaymotors/TURB...022QQitemZ350066232438QQrdZ1QQsspagenameZWDVW

 

[amair001]

you'll need a j-pipe too

 

[amair001]

and oil lines for the turbo

 

[mp3-79bronco]

is this the right turbo?

http://cgi.ebay.com/ebaymotors/T25-...022QQitemZ350066559126QQrdZ1QQsspagenameZWDVW

 

[amair001]

Yea as long as you have an turbo manifold with the right fitting for the T25/28. Any stock MSP manifold will work. Theres usually some in the for sale section

 

[mp3-79bronco]

okay ive read a lot on here and basically know how im gonna set my turbo up but im looking for a BOV to run and i saw this...

Id rather not shell out 200 if this 50 dollar one will work.... i will only be running 8-10 psi...

http://cgi.ebay.com/ebaymotors/Type...014QQitemZ330241876303QQrdZ1QQsspagenameZWDVW

 

[amair001]

You would probably be better off with a stock msp one. id be careful with buying turbo parts on ebay, some tend to be very poor quality, just a piece of advice

 

[mp3-79bronco]

the msp uses a BPV valve on the stock configuration....

im going to relocate my maf to the cold pipe and run a BOV before it..

 

[kcbhiw]

Skip the cheapo ebay replica turbos. A new quality turbocharger will cost well over $500. There are many documented cases of those units failing and thustly taking the engine with it. Remember, you get what you pay for. Spend the money for a quality turbo.