Turbo X/S (50/50 Hybrid BOV) installed..

cornflaykes

Member
:
07 Mazdaspeed 3 GT
Well after seeing reviews on alot of the bov's out there, I went with the
Turbo X/S http://www.turboxs.com/item.php?ID=243 bov. Not only does it recirculate but it also dumps 50% vta. So you get the sound and a car that dosent idle funny or run richer ( car runs rich as hell already).

Only tools I needed were 10mm socket w/ratchet and right angled needle nose pliers. Took less than ten minutes to install.

I cant believe what a diffrence it makes my switching the crappy plastic stock bov, I swear the car feels like it pulls harder around 5500rpm's and higher.

I recomend this bov 100%, and the customer service at Turbo X/S is good as well. They just need to hurry up with the 3inch turbo back..(thats my next mod)(hump)

I can post pics and can try to get a sound clip when it is under load if need be, just let me know...


Benji
 
cornflaykes said:
Well after seeing reviews on alot of the bov's out there, I went with the
Turbo X/S http://www.turboxs.com/item.php?ID=243 bov. Not only does it recirculate but it also dumps 50% vta. So you get the sound and a car that dosent idle funny or run richer ( car runs rich as hell already).

Only tools I needed were 10mm socket w/ratchet and right angled needle nose pliers. Took less than ten minutes to install.

I cant believe what a diffrence it makes my switching the crappy plastic stock bov, I swear the car feels like it pulls harder around 5500rpm's and higher.

I recomend this bov 100%, and the customer service at Turbo X/S is good as well. They just need to hurry up with the 3inch turbo back..(thats my next mod)(hump)

I can post pics and can try to get a sound clip when it is under load if need be, just let me know...


Benji
post pics and video! please
 
I will on my next day off, should be around mid week...

Sound wise, first and second more of a light whoooosh sound and under heavier load 3rd thru 6th more of whooosh plus whistle. This is with stock airbox also, when I install my cold air it should be louder. But I bought this BOV for function rather than sound...
 
yaaay!

my mzspd cia will be in on wed. and my turbo x/s bov is on its way !!!

just thought i should share my happiness !

(mswerd)
 
Hey Cornflaykes Cant wait till mid week to hear your BOV !! ;) I'm planning to buy the same as yours !!
 
Gained Power??? Impossible unless your old valve was leaking air (possible)

I had a 50/50 GFB on my SVO. My MAF conversion didn't like it so i went with a Forge unit. Works Much better.

Sounds clips would be nice.
 
justa4banger said:
Gained Power??? Impossible unless your old valve was leaking air (possible)

I had a 50/50 GFB on my SVO. My MAF conversion didn't like it so i went with a Forge unit. Works Much better.

Sounds clips would be nice.
forge unit? where can i see this
 
Oh and do you have any detailed pics of the install? I just want to see how the stock one attaches to the pipe.
 
With my turbo kit, there was like a nipple that you attached a really short piece of rubber pipe to, then the BOV went onto the the rubber pipe and was held in place by hose clamps.
 
Jeph said:
With my turbo kit, there was like a nipple that you attached a really short piece of rubber pipe to, then the BOV went onto the the rubber pipe and was held in place by hose clamps.
whats is the difference with this and hks?
 
Thanks. I saw the second vid before but the first was kinda od what I was looking for. I wander if anyone has any drive by clips.
 
Back