Torque settings for 2010 pad and rotor replacements?

[LordJezo]

Does anyone have these? I have been searching around and I am getting figures from 20 to 80 on some of the bolts. One post here has figures but no idea where they came from.

I am going to ve doing the brakes and the rotors so accurate torque specifications for the caliper and the caliper mounting bracket bolts would be appreciated if anyone knows them.

 

[cpb406]

For a 2012 they are (in N-m):

Front:
Caliper to Steering Knuckle capscrews: 107.8-127.4
Slide Pin Bolts: 83.3-93.1
Flathead screws for disk to hub: 9.8-14.7

Rear:
Caliper to Parking Brake Plate capscrew: 78.4-101.9
Slide Pin Bolts: 21.6-31.4

 

[LordJezo]

For a 2012 they are (in N-m):

Any major difference between a 2010 and 2012's brake system?

 

[Wurf]

For a 2012 they are (in N-m):

Front:
Caliper to Steering Knuckle capscrews: 107.8-127.4
Slide Pin Bolts: 83.3-93.1
Flathead screws for disk to hub: 9.8-14.7

Rear:
Caliper to Parking Brake Plate capscrew: 78.4-101.9
Slide Pin Bolts: 21.6-31.4

Conversion for typical torque wrenches with FT lbs - http://www.unitconversion.org/energy/newton-meters-to-foot-pounds-conversion.html

I did not bother to do the screws.

Front:
Caliper to Steering Knuckle capscrews: 79.5-93.9 ft lbs
Slide Pin Bolts: 61.43-68.66


Rear:
Caliper to Parking Brake Plate capscrew: 57.82-75.15 Ft Lbs
Slide Pin Bolts: 15.93-23.16