oh thanks for the info...i'm going to check that out (again!)wongpres said:The 2.3l in both the Mazda6 and Mazda3 have chain-driven timing belts (the Mazda3 2.0l is also like this). There are various rubber accessory belts around the engine. In fact, if you just open the hood, I don't even think you can see the timing chain at all (it's all enclosed).
RonH said:American and foreign cars (rear wheel drive) have used chains for 100 years or so. I've never heard of one breaking in my 45 years of driving. Now, if you overheat the engine and there's a lot of miles on the engine, they can stretch and have to be replaced, along with the sprokets. A chain should last way over 100,000 miles. A chain is much more reliable than a belt, but belts are quieter.
FishV8 said:I drive a 98 Camaro Z28 it's an LS1 engine pushing 370bhp stock rear wheel drive car and if you read more about them you would know that those have timing chains and are nearly indestructable. And like RonH said they stretch over time and then needs replacing but after a hell lots of miles or abuse. All in all I am very glad alot of auto makers are starting to go to timing chains since my Stealth required maintenance after 60,000 miles and was sent over twice because it was incorrectly done the first time and skipped two teeths. I feel more secure now since my new Z28 has a timing chain. And by the way my friend finally decided to buy the Mazda 3 but the GS 5spd and not the GT. Still glad he got it tho !!!![]()
RonH said:American and foreign cars (rear wheel drive) have used chains for 100 years or so. I've never heard of one breaking in my 45 years of driving. Now, if you overheat the engine and there's a lot of miles on the engine, they can stretch and have to be replaced, along with the sprokets. A chain should last way over 100,000 miles. A chain is much more reliable than a belt, but belts are quieter.