Thailand Mazda2 Automatic Turbo
- Thread starter Nat_superwhite
- Start date
boostedmsp
Member
- :
- 2003.5 Titanium Grey Metallic Mazdaspeed Protege
Very nice!
Corcaa_Mazda2
Member
- :
- 2012 Mazda 2
A question to AN7.
I see a photo of a 2 with '99 miata wheels, did you installed the tire pressure sensor on them? Thanks!
I see a photo of a 2 with '99 miata wheels, did you installed the tire pressure sensor on them? Thanks!
Nat_superwhite
Member
- :
- Mazda 2 - 2010
i think you are right , My english is not good ,i misunderstood you question
if you mean the sensitive of standard engine after modified.....they will blown away ?
the answer is nope, my friend's m2 boost more than 1.2 bar and get 200 hp ++
The engine is all original like me, no inside part switched.
it's still run fine after 10000 kms and still look good after rechecked.
mazda 2 engine is very tough
Nat_superwhite
Member
- :
- Mazda 2 - 2010
IHI VF 3 series ballbearing
Nat_superwhite
Member
- :
- Mazda 2 - 2010
AN7 - You said the connecting rods of mazda2 are very sensitive,Why ?
your turbo setting was blown it away ?
your turbo setting was blown it away ?
No.
This is just my thought because mx5 NAs+NBs were having problems with the connecting rods over 27kg torque and Our connecting rods are longer than that(132.5mm vs 140.6mm). Ok you will tell me that our engine is newer but also NC's were blowing away the connecting rods with the corsworth compressor kit at 6-8psi and also the disi turbo engine of the mps have issues with the connecting rods.
Nat_superwhite
Member
- :
- Mazda 2 - 2010
ok..i see you point
but don't worried, my friend didn't got any error after modified for a year.
He drove it everyday in many conditions (traffic jam, highway speed, long distance etc)
my car is no error too. 6 months after set up
i'm still happy with it.
Me and my friend are same.
We didn't think much
We just did it our ways
and let it be
M2 R A/T Turbo
Hi all,
just found this forum .. great one, so i decided to register
next month i will go to bangkok, need your advise Nat, which store that sell accessories for Mazda 2?
previously i ordered from rs style, but they did wrong shipment method, and got stuck in our customs.
oh, i also installed turbo in my m2 matic. Done last January, but since i still have to do body repair (hit by motors/cars etc.. u can't imagine jakarta traffic :'() so i haven't take a proper picture.
i only have these pics when still in workshop (shady)
Engine:
-Turbo kit (for mazda3), but i changed the turbine with T25, ex from mitsu evo iii
-Adjusted/customs header, piping
-Blow off: HKS / GReddy (change if bored)
-HKS turbo timer
-Defi meters
-Piggyback Dastek unichip
-Boost 0.55 bar, dyno on engine : 176 hp
installed and tuned by M-Tuning, setting by RS Tuning (both are race and rally specialist)
Exhaust:
-Muffler HKS power silent Jasma
Suspension:
-Coilover tanabe sustec pro
Wheel:
-Volk rays G7 forged 18"
-Tyre : falken ziex 18/215/45
Interior:
-Bride semi bucket, carbon
-Takata belt (but uninstalled now.. uncomfort for daily use (whistle))
My task to do :
-to get engine dumper, anyone pls advise where i can get engine dumper for m2?
now i have to re adjust the pipes, cause m2 has very soft engine mounting
-body repair
-to get brake kit (but too expensive) or brake pad and wiring
-tidy up all wiring .. m2 has limited engine space, so now looks v v crowded :'(
my friend who has installed turbo in his m2 manual, relocated the battery in the trunk
Wish list:
-audio upgrade
-carbon dashboard
-carbon hood and body kit
the only sad thing about M2 A/T : already loss all the gear in rpm 5000/5500 .. while the power still there. need 7tronic :'(
Hi all,
just found this forum .. great one, so i decided to register
next month i will go to bangkok, need your advise Nat, which store that sell accessories for Mazda 2?
previously i ordered from rs style, but they did wrong shipment method, and got stuck in our customs.
oh, i also installed turbo in my m2 matic. Done last January, but since i still have to do body repair (hit by motors/cars etc.. u can't imagine jakarta traffic :'() so i haven't take a proper picture.
i only have these pics when still in workshop (shady)
Engine:
-Turbo kit (for mazda3), but i changed the turbine with T25, ex from mitsu evo iii
-Adjusted/customs header, piping
-Blow off: HKS / GReddy (change if bored)
-HKS turbo timer
-Defi meters
-Piggyback Dastek unichip
-Boost 0.55 bar, dyno on engine : 176 hp
installed and tuned by M-Tuning, setting by RS Tuning (both are race and rally specialist)
Exhaust:
-Muffler HKS power silent Jasma
Suspension:
-Coilover tanabe sustec pro
Wheel:
-Volk rays G7 forged 18"
-Tyre : falken ziex 18/215/45
Interior:
-Bride semi bucket, carbon
-Takata belt (but uninstalled now.. uncomfort for daily use (whistle))
My task to do :
-to get engine dumper, anyone pls advise where i can get engine dumper for m2?
now i have to re adjust the pipes, cause m2 has very soft engine mounting
-body repair
-to get brake kit (but too expensive) or brake pad and wiring
-tidy up all wiring .. m2 has limited engine space, so now looks v v crowded :'(
my friend who has installed turbo in his m2 manual, relocated the battery in the trunk
Wish list:
-audio upgrade
-carbon dashboard
-carbon hood and body kit
the only sad thing about M2 A/T : already loss all the gear in rpm 5000/5500 .. while the power still there. need 7tronic :'(
Last edited:
