Spool Front Fmic With Injen

[prospeed]

spool fmic with injen

 

[ARunto]

exactly what I wanted to see...thank you

 

[DiscreetSpeed]

nice!

 

[prospeed]

front shot

 

[RAAZ227]

 

[SpicyRay]

garden state? s***, i gotta check this car out!

 

[PaulMP3]

looks good, i like how he uses SS now. Check out the NJ section for the next meet. we didnt have a spicy at the last meet.

 

[122 Vega]

Thank you! The pipes sure do not seem to hang down that far on this one. The black one on Spool's site, the pipes look lower. They should use these pics instead, it looks awesome.

Britt

 

[HondaToMazda]

front shot

Thats so awesome man! Two Thumbs up goes to spool.

 

[HondaToMazda]

Any fitment issues? I'm sure theres not because its spool! Just thought i might ask anyways.

 

[prospeed]

I WAS ABLE TO INSTALL WITHOUT REMOVING THE FRONT BUMPER.IT WAS ALITTLE TIGHT BUT YOU CAN DO IT. HELPS IF YOU HAVE A LIFT LIKE I DO. ALSO WILL POST PICS OF EXHAUST FROM SPOOL. MAYBE BY THE WEEKEND.

 

[prospeed]

THE ONE PIPE SLIGHTLY TOUCHES THE FAN BRACKET BUT ITS NOT AN ISSUE.

 

[SpicyRay]

if i had known about the last meet, i woulda gone! then u woulda had a spicy.

 

[Striker187]

nice (thumb). any stalling problems with the open vent bov?

 

[prospeed]

IT DOES STALL ONLY IF I COME OUT OF BOOST AND PUSH ON CLUTCH TO COAST TO A STOP. IF I RIDE THE GEAR TILL BOOST COMES BACK TO VACCUM THEN PUSH ON THE CLUTCH ITS FINE. I HAVE NOT REALLY MESSED AROUND WITH IT YET. I GET KIND OF LAZY ESPECIALLY WHEN YOU WORK ON CARS FOR 10 HOURS.

 

[spoolinmp3]

Looks good

 

[HondaToMazda]

How much did this setup cost?

 

[nattyboy513]

the the price info is on spool's wesite...

what is the easiest way to remedy the whole stalling issue?

 

[TampaBlackMSP]

the the price info is on spool's wesite...

what is the easiest way to remedy the whole stalling issue?

Just keep some kind of diverter/bypass valve installed instead.

 

[spoolinmp3]

Just keep some kind of diverter/bypass valve installed instead.

The pipes are flanged for either the HKS standard or Greddy type S valve that can easily be recirculated. Justin did it on his car (maybe he can post pics wink wink)
All thats needed is to run a hose from the BOV outlet to the plastic piece of pipe befor the maf that the original BPV was hooked up to.

Also for those interested if you want to run your oem stock BPV we can set it up and not run the pipes with a external BOV flange and just weld a nipple on there.