TitaniumSpeed
Member
- :
- #1530 2003.5 MAZDASPEED Protege
spoolsux said:
:wtf: No reason to regard your post without any explaination...spool has offered nothing but helpful information and supportive feedback
Spool Dyno #s are in!
- Thread starter spoolinmp3
- Start date
:wtf: No reason to regard your post without any explaination...spool has offered nothing but helpful information and supportive feedback
S
spoolsux
maybe you should buy somespool springs and see how they suck! The don't work and spool denies everything!
TitaniumSpeed
Member
- :
- #1530 2003.5 MAZDASPEED Protege
BEEP BEEP BEEP BEEP *turns off propaganda alarm*
Write a review in the vendor section or start a spool bashing thread in the flamewars/offtopic but no need to screw this informative thread up...
Write a review in the vendor section or start a spool bashing thread in the flamewars/offtopic but no need to screw this informative thread up...
Anyways!
I got a question about Jus10's MSP.
I was looking back on my stock dyno's and didn't see the big dips like you had. Have you always had a big dip like that on your car? I looked at the dyno sheets and noticed that about 3200 rpms you dropped to like 97 hp or something like that (not looking at it exactly right now) from being at 102. And then again something of the same in the high 3000 to low 4000 range. What is up with that!
Do other members experience stuff like that too? When you went back to stock did you have your bypass valve on there or did you have the bov on there? Does those really make a difference?
Could someone explain how his car would be like that versus others who aren't that way?
Why would 1 car be that way and another not be that way? Can other people post their stock dyno's.
And yes I am kinda thread jacking, but I didn't know where to put this at!
I got a question about Jus10's MSP.
I was looking back on my stock dyno's and didn't see the big dips like you had. Have you always had a big dip like that on your car? I looked at the dyno sheets and noticed that about 3200 rpms you dropped to like 97 hp or something like that (not looking at it exactly right now) from being at 102. And then again something of the same in the high 3000 to low 4000 range. What is up with that!
Do other members experience stuff like that too? When you went back to stock did you have your bypass valve on there or did you have the bov on there? Does those really make a difference?
Could someone explain how his car would be like that versus others who aren't that way?
Why would 1 car be that way and another not be that way? Can other people post their stock dyno's.
And yes I am kinda thread jacking, but I didn't know where to put this at!
boostisgood
Member
- :
- 1988 FC3S TII
Sheeesh I smell Smolten/rx8slow here. ANYONE ELSE ? Get a life man, I call for an IP BAN IP BAN IP BAN.
Sorry Terry, Dont let 1 assclown get to ya, we appriciate what you are doing.
Sorry Terry, Dont let 1 assclown get to ya, we appriciate what you are doing.
twiztedjeckel
Member
- :
- '04 SVT Focus
boostisgood said:[BSorry Terry, Dont let 1 assclown get to ya, we appriciate what you are doing.
true for the most part but some of us are starting to loose patience
S
spoolsux
This is not Smolten/rx8!!!
I have read many posts about Spool clients, and the problems that have occured with there products. If you ask many other people on this forum about their experiences with Spool, you will find that about half of them were not satified with the product. They lived with the problems, and/or waited until others spoke up for a fix/replacement. Feel free to question pther spool clients! You will see!
I have read many posts about Spool clients, and the problems that have occured with there products. If you ask many other people on this forum about their experiences with Spool, you will find that about half of them were not satified with the product. They lived with the problems, and/or waited until others spoke up for a fix/replacement. Feel free to question pther spool clients! You will see!
DooMer_MP3
Member
1st MP3 in NH said:
That was definitely an unfortunate situation for Spool. Its not like they make the springs. However, they are still indeed raising the rear end up on the MSP for some reason. 2 MSP owners posted that even the newly fixed ones are higher in the back than the stock MSP springs, I haven't heard any comments thus far from SPOOL. Not like I care though, they work fine and dandy on my MP3
.While I kinda see "spoolsux" reason for being ticked off, its very childish and inappropriate to signup and call people out like this in a completely unrelated thread. Not to mention the waste of board resources for the account.
Chris
Last edited:
duMb KeoLa
Member
its definelty a kid doing it, why not just validate your comments and sign on to your real name? or talk to him about it and stop your ******* whining! ive dealt with terry/spo0L and fortunately am one who has nothing but praise to those guys!!!!! get a life you idiot and stop being a little b****
Spool Sux this forum is killing me
First of all since you are a chump and cannot come out in the open but have to hide behind a funny screen name..........I would like to thank you. Last night I checked how many people viewed this thread and it was 1000. In just an 8 hour period the views on this thread doubled to 2000!!
I just want to thank SpoolSux on a job well done. We recieved many inquiries about our products today and partially we owe it to you. Do you want a job? we can hire you as a forum drama instigator. This will bring more contreversy subsequently giving us more attention and sales
Seriously if this is an attack meant on Spool and you have a problem with our product call me (Terry) personally and I will do whatever it takes to make you happy. We have the reputation on this forum for great service. Its not cool when people are not happy. I know you cannot satisfy everybody out there but I sleep peacefully at night knowing that most of our customers are happy.......and most of them are repeat customers purchasing things from us repeatedly
First of all since you are a chump and cannot come out in the open but have to hide behind a funny screen name..........I would like to thank you. Last night I checked how many people viewed this thread and it was 1000. In just an 8 hour period the views on this thread doubled to 2000!!
I just want to thank SpoolSux on a job well done. We recieved many inquiries about our products today and partially we owe it to you. Do you want a job? we can hire you as a forum drama instigator. This will bring more contreversy subsequently giving us more attention and sales
Seriously if this is an attack meant on Spool and you have a problem with our product call me (Terry) personally and I will do whatever it takes to make you happy. We have the reputation on this forum for great service. Its not cool when people are not happy. I know you cannot satisfy everybody out there but I sleep peacefully at night knowing that most of our customers are happy.......and most of them are repeat customers purchasing things from us repeatedly
Last edited:
Ohh yeah lets see if we can get 3000 views by tommorow
jonnydoe48
Member
terry is the man.
