rear caliper piston??

[bruster4_5]

attempted to do my brakes saturday got the fronts no problem but the rear calipers are the problem, are they the kind that need to be turned in. i tried pushing them in but they wouldn't move. yes i did crake the bleeder valve but it didn,t help at all.

 

[Keno1542]

ya they need to be turned in...you can rent the tool for free at autozone

 

[bruster4_5]

thanks i called mazda earlier today any they couldn't tell me

 

[kamon8404]

You can buy the tool from autozone for next to nothing. Its a box that you can put on the front of a socket wrench and turn them right in.

 

[Stormtrooper77]

Just use vice grips and turn slowly but firmly.

 

[mike2225]

I had the same issue with my rear breaks, Right behind the piston there is an allen head screw that needs to be backed off a little, once you do that the piston moves quite easy.

 

[Keno1542]

I had the same issue with my rear breaks, Right behind the piston there is an allen head screw that needs to be backed off a little, once you do that the piston moves quite easy.

the msp calipers are not the same as the regular protege calipers...msp ones dont have a allen screw in the back

 

[SwirlFX]

what to expect.

 

[SwirlFX]

I wish images like this were available before I started my rear pads.

 

[evilmonkeyMSP]

good stuff. thanks for the pics