Random Technology Direct Fit High Flow Cat

[SilverBulletES]

Contacted these guys and received a quick and courteous reply. Anyone have a good pic of the stock midpipe? If not, I will take one this weekend.

They are based in Atlanta and supposedly make some of the best cats around so I'll happily volunteer my car as a test subject.

Christian-

We built a system for the Mazdaspeed model and the configuration of that converter made it relatively expensive. That combined with the fact that so few Mazdaspeed models were produced and that there seemed to be relatively little interest, convinced us to not put that particular model into production. The converter for the standard Protg will probably be an entirely different configuration and the market is undoubtedly larger. We'll build just about anything there's a market for, so if there really is any significant demand, getting a direct fit converter built won't be a problem. For openers, it would be really helpful if you could send us a digital photo of the stock converter. Once we see that, we can determine whether it makes sense to proceed.

I appreciate you contacting us.

Best regards,

Dave Emanuel

http://www.randomtechnology.com/

Meanwhile, let's start a petition to show him the huge Proteg market they can tap.

(If this violates some board rule, let me know.)

1. SilverBulletES (Christian D)
2.
3.
4.
5.

 

[J dragon]

Meh who cares exactly?

oh well to help the cause...

1. SilverbulletES
2. J dragon

 

[SilverBulletES]

The interest here is huge!

Anyway, think of it this way-- $200 versus $260 for the MAM catted pipe.
Random Technologies cat are supposed to be best. OKie?
Might as well have more than just one company offering a bolt-on high-flow cat midpipe.
Competition is good, right?

 

[Ryoga28]

1. SilverBulletES (Christian D)
2. J dragon
3. Ryoga28
4.
5.

 

[Kansei]

1. SilverBulletES (Christian D)
2. J dragon
3. Ryoga28
4. zverg
5.

 

[ND4MSP]

Good looking out. So a direct fit cat = whole midpipe piece then?

 

[SilverBulletES]

Good looking out. So a direct fit cat = whole midpipe piece then?

Yep, here's all the other ones they make:
http://www.randomtechnology.com/products.html

They already make them for several Mazda models already.

 

[J dragon]

just that one piece should be alot less than $200....for $60 more i get a full pipe. (uhm)

seriously I like competition....,but come on where's the sensibility?

 

[SilverBulletES]

just that one piece should be alot less than $200....for $60 more i get a full pipe. (uhm)

seriously I like competition....,but come on where's the sensibility?

It is a full pipe G-money!
Check yoself befo you wreck yoself!
http://shopping.lightningmotorsports.com/customer/home.php?cat=465

BTW does anyone have access to good under-the-car shot clearly showing our midpipe? I know there have to be at least 200 posted on this forum, but I can't remember which threads...

 

[Yendor]

Is this the pic you are looking for?

 

[SilverBulletES]

Is this the pic you are looking for?

Domo arigato gozaimasu!!

A very JDM thank you.

 

[SilverBulletES]

Nevermind-- they wouldn't be able to get below the cost of the MAM pipe. The pipe going up to our cat is too bendy. I guess the Mazdaspeed pipe is the same? (Never looked.) They already tried with that.