Question about cutting or heating springs.
- Thread starter Ahjun
- Start date
DONT RUIN YOUR CAR!!! If you cut or heat sag your springs on a mazdaspeed3 I will personally delete all of your posts from that point on.... it would totally be worth the abuse of my mod power (antoine, if you read this...im just kidding, but seriously, wouldnt it be worth it??)
lol nice jbiird
yeah don't do it if you like the way your car handles now by cuttting or heating your springs you will drasticly change your suspension in a bad way not in a good way like a set of lowering springs will do for you... cutting or sagging is for looks (ghetto looks but looks nonetheless) not for spirited driving.
yeah don't do it if you like the way your car handles now by cuttting or heating your springs you will drasticly change your suspension in a bad way not in a good way like a set of lowering springs will do for you... cutting or sagging is for looks (ghetto looks but looks nonetheless) not for spirited driving.
Last edited:
TheDutchGun
Member
- :
- 2006 Ford Mustang GT
SwampAss said:
Another legendary post from Swampass.
I kid, but had a friend actually do that to his yoo hoo brown escort sedan. I think it was an 86. It was awesome. He painted his rims hot pink so you could see the dopeness through the pseudo chrome wheel covers. He also had a pink flamingo bendtenna and a giant Oakley Thermonuclear protection sticking covering half of his windshield. (if that hints to how long ago this was)
In summation:
Heat sagging or cutting your factory springs is a great way to totally foul up the ride and handling of your car. If you cut them too short and you unload the suspension over a bump, the spring can unseat from the perch and cause your car to turn ubruptly in either direction if you don't have a firm grasp on the wheel.
Pony up and get a set of QUALITY lowering springs. Most of the cost of a lowering spring is material. You buy a $69 set from ebay and it's made from $68 worth of steel. I come from the school of: if you plan to deviate from stock...don't skimp on tires, wheels, or suspension. Those three things are keeping you from hitting s*** like trees, tractor trailers, and other motorists.
You hit me and my wife because you saved $100 on springs, and you'll lose that $100 and then some in dental visits. (lol2)
In summation:
Heat sagging or cutting your factory springs is a great way to totally foul up the ride and handling of your car. If you cut them too short and you unload the suspension over a bump, the spring can unseat from the perch and cause your car to turn ubruptly in either direction if you don't have a firm grasp on the wheel.
Pony up and get a set of QUALITY lowering springs. Most of the cost of a lowering spring is material. You buy a $69 set from ebay and it's made from $68 worth of steel. I come from the school of: if you plan to deviate from stock...don't skimp on tires, wheels, or suspension. Those three things are keeping you from hitting s*** like trees, tractor trailers, and other motorists.
You hit me and my wife because you saved $100 on springs, and you'll lose that $100 and then some in dental visits. (lol2)
redheaddstpch1d
Member
- :
- MS3 Sport
Coil-overs...lower yer car the right way!!!!
clos561 said:
Not to mention you will literally loose any warranty on your entire suspension. Trust me that will not be just your springs, struts and shocks. That will be ball-joints, tie-rods, sway-bars, all bushings and links etc. etc. A few hundred dollars for correct lowering is well worth it.
goldwing2000
OG Mazda Mafia
- :
- 2004 Mazda3s Hatch; 346,000 mi (sold)
2024 CX-5 CE; 7,500 mi (so far)
njaremka said:
That's the word I was thinking...
Similar Threads and Articles
New Threads and Articles
-
-
New 2025 CX-5 with highway vibration problem; tires?- By DarkskiesIL
- Replies: 9
-