Po171 & p0131

:
Mazdaspeed Protege 2003.5
i put ma foot to the ground car suck up mad air and does not move i have FMIC pipping and stead speed mani with bov return line i donno wuht going is car running lean or rich i dont kno can some one help me asap
 
p0171 is bank 1 to lean, so id go with a vacume leak somewhere. but while you have that code, baby the car.

running lean=zoom zoom boom
 
I'm getting the same trouble codes and same response on my car, P0131,P0171,P0103 and P0140 I am in the process of swapping out all vacuum lines, cleaned the MAF and my wastegate is less than a year old. Let me know if you figure out the problem with yours
 
all sensor are new buht its still having the problem im guessing my air fuel is off that why is causing all this?
 
it is you a/f ratios that are making it run like s***, but, you have to figure out whats causeing the bad a/f ratio. From the sounds of things I would put my money on a vacuum leak considering you have already changed out both sensors. These cars are notorious for having crappy vacuum hoses and tons of leaks. I'm in the process of changing all mine over to a silicone hose kit i bought from *************.com only about a quarter of the way through the project
 
But wuht if I change the vacum what if it still goes those that mean I have to tune the car cause the air ratio is off
 
I dont understand what your trying to say. basically you have to figure out whats causeing your check engine light. once that is fixed your car should run fine without tuning it. try unplugging your negative battery terminal for at least 30 min to let all the trouble codes clear. hook it back up and take it for a spin you should notice the power is restored to your car.
 
Back