P5 brake upgrades

[neubreed]

Well my right rear caliper has sprung a large leak. I wanna upgrade the brakes on the car as this is a great reason. I was thinking mazdaspeed brakes all around or maybe the 6 front brake upgrade. My big questions are will any setup beside stock p5 fit over the p5 stock 16's? And what all is involved with each setup? Thanks in advance.

 

[BRIAN_MP5T]

Almost nothing that is an upgrade will fit the stock 16"

The MS6 rears are bigger, but I believe that you could just get OEM sized cross drilled disks and some aggressive pads..

 

[tweety2300]

Msp brakes will I believe for mz6 you gota have 17s check out the msp section there's quite a few threads about it

 

[Shi-Fu JaY]

I ran 07+ MZ6 front brakes on stock 03 p5 wheels

 

[Jordysoso]

Normal 6 brakes will fit on the front, direct bolt on, calipers and all. On the rear, I suggest staying stock and getting a good set of blank rotors, good pads and decent brake fluid

 

[Justin2129]

i have 6 brakes all the way around with stock wheels and theyre beast. the only thing you have to do is reroute the e-brake cable

 

[NickP5Rider]

04 mazda 6 front brake fits oem 16'' rims

 

[neubreed]

Sweet, thanks guys. All questions answered, now to decide which route to take.

 

[Jordysoso]

i have 6 brakes all the way around with stock wheels and theyre beast. the only thing you have to do is reroute the e-brake cable

Year of the 6 and how did you do the reroute?

 

[Justin2129]

they were fastened to the car, so i unbolted the pieces holding them on and zip-tied them in new places

here's my thread:

http://www.mazdas247.com/forum/show...Mazda-6-Brake-upgrade&highlight=mazda+6+brake