original wastegate vacuum hose

[Myspeed12]

I just want to know what vacuum line was the wastegate orginally connected to. Right now it is connected to my boost controller, and I want to take out the boost controller, but i forgot where the vacumm line from the wastegate originally goes. Does this make sense?

 

[solo.]

From wastegate, it Tees out to the intake manifold and the stock bypass valve

 

[Myspeed12]

if i took off the stock bypass valve and bought a HKS BOV would it be teed off to that?

 

[ForceFed]

Just connect it to a good vacuum source....Tee off the BOV line if you would like.
Not the best way..but it would work.
a direct line to the Charge pipe or Mani is the best source..

 

[Myspeed12]

whats a charge pipe?

 

[ForceFed]

whats a charge pipe?

The pipe coming out of the Compressor Housing(the turbo outlet pipe)

 

[greasemonkey524]

if i took off the stock bypass valve and bought a HKS BOV would it be teed off to that?

You aren't planning on swapping out the BPV for a BOV are you?

 

[Myspeed12]

i actually have the hot pipe and coldpipe from SU with a HKS BOV on the coldpipe.

 

[greasemonkey524]

Ok. For a minute I thought you were just going to try swapping them.

 

[Myspeed12]

So just to clarify, I could just run a hose from my wastegate to the turbo outlet?